D-Link DSL-302G User Manual page 83

Hide thumbs Also See for DSL-302G:

Table of Contents

Split Line Filter

If you are instructed to use a split line style filter you must install the device between the Modem and the phone

jack. Use standard telephone cable with standard RJ-11 connectors. The splitter has three RJ-11 ports used to

connect to the wall jack, the Modem and if desired, a telephone or telephone device. The connection ports are

typically labeled as follows:

Line - This port connects to the wall jack.

ADSL – This port connects to the Modem.

Phone – This port connects to a telephone or other telephone device.

The diagram below illustrates the proper use of the split line style filter.

DSL-302G ADSL Modem User's Guide

Split Line Filter Installation

Table of Contents