Mini Pci Card; Replacing The Optical Drive; Removing The Mini Pci Card - Dell Latitude 120L Service Manual

Table of Contents

1. Close your display and turn the computer upside-down.

2. If a device security screw is present, use a Phillips screwdriver to remove the M2.5 x 8-mm screw.

3. Using a screwdriver or a plastic scribe, push the notch by the device security screw hole toward the outside of the computer.

4. Pull the optical drive straight out of the media bay.

1 optical drive

2 drive removal slot

1. Slide the new drive into the bay until it snaps securely into place.

2. If you removed the M2.5 x 8-mm device security screw, replace it.

3. Turn the computer top-side up and open the display.

4. The operating system automatically recognizes the device. If necessary, enter your password to unlock your computer.

Mini PCI Card

If you ordered a Mini PCI card with your computer, the card is already installed.

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE:

To prevent damage to the system board, remove the main battery before working inside the computer.

1. Follow the instructions in

Before Working Inside Your

2. Turn the computer upside-down, loosen the captive screws on the memory module/Mini PCI cover, and then remove the cover.

3 M2.5 x 8-mm device security screw (if present)

Computer.

Table of Contents