Table of Contents
Advertisement
QQ
3 7 63 1515 0
7-1. VIDEO SYSTEM ADJUSTMENT
Reference Disk
HLX-505 (NTSC Single layer disk) J-6090-089-A
HLX-504 (NTSC Dual layer disk)
1. Video Level Adjustment (RD-045 Board)
< Purpose >
This adjustment is made to satisfy the NTSC standard. If it is adjusted
incorrectly, brightness will be too bright or too dark.
Mode
Signal
Test point
Instrument
Adjusting element
Specification
Adjusting method:
1 ) Insert the reference disk and play back the 100% colour bars.
2 ) Adjust RV2301 for 1.0 Vp-p.
TE
L 13942296513
2. Component Video Output Level Adjustment
(RD-045 board)
< Purpose >
This is the adjustment for component video output. If this adjustment
is made incorrectly, brightness of the component signal that is
connected to the projector having COMPONENT input will have
incorrect brightness.
Mode
Signal
Test point
Instrument
Adjusting element
Specification
Adjusting method:
1 ) Insert the reference disk and play back the 100% colour bars.
2 ) Check that the Y level is 1.00
www
.
http://www.xiaoyu163.com
J-6090-088-A
Video level adjustment in test mode
Colour bars
LINE OUT (VIDEO) connector
(terminated in 75Ω)
Oscilloscope
RV2301
+ 0.04
1.00
Vp-p
– 0.02
1.0
Fig. 7-1
Video level adjustment in test mode
Colour bars
COMPONENT VIDEO OUT (Y)
connector (terminated in 75Ω)
Oscilloscope
RV2302
+ 0.04
1.00
Vp-p
– 0.02
+ 0.04
Vp-p.
– 0.02
1.0
x
ao
u163
y
Fig. 7-2
i
http://www.xiaoyu163.com
SECTION 7
2 9
8
ADJUSTMENT
3. S-Video Output S-Y Level Check
< Purpose >
This check confirms that the video output level at the S-video output
connector is correct. If this adjustment is made incorrectly, picture
will not be displayed correctly when the S-video connector output
signal is connected to TV using cable.
Mode
Signal
Test point
Instrument
Specification
Adjusting method:
1 ) Insert the reference disk and play back the 100% colour bars.
2 ) Check that the S-Y level is 1.0 ± 0.05 Vp-p.
4. S-Video Output S-C Check
+ 0.04
Vp-p
< Purpose >
– 0.02
This check confirms that the S-video output S-C conforms to the
Q Q
3
6 7
1 3
1 5
NTSC standard. If it is adjusted incorrectly, colour will be too dark
or too thin.
Mode
Signal
Test point
Instrument
Specification
Checking method:
1 ) Insert the reference disk and play back the 100% colour bars.
2 ) Confirm that the burst signal level of S-C is 300 ± 30mVp-p.
+ 0.04
Vp-p
– 0.02
co
.
7-1
9 4
2 8
Video level adjustment in test mode
Colour bars
S-VIDEO OUT (S-Y) connector
(terminated in 75Ω)
Oscilloscope
1.0 ± 0.05Vp-p
1.0 ± 0.05 Vp-p
Fig. 7-3
0 5
8
2 9
9 4
2 8
Video level adjustment in test mode
Colour bars
S-VIDEO OUT (S-C) connector
(terminated in 75Ω)
Oscilloscope
286 ± 30mVp-p
Fig. 7-4
m
RDR-GX7
9 9
9 9
286 ± 30 mVp-p
- Quick Links:
- Setting up the Remote
Hide quick links:
Advertisement
Table of Contents
