Managing The Stack (Cli); Configuring Stack Member, Stack Port, And Nsf Settings - Dell PowerConnect 8024 User Configuration Manual

Table of Contents

Managing the Stack (CLI)

This section provides information about the commands you use to manage

the stack and view information about the switch stack. For more information

about these commands, see the

8024/8024F/8132/8132F/8164/8164F CLI Reference Guide at

support.dell.com/manuals.

Beginning in Privileged EXEC mode, use the following commands to

configure stacking and NSF settings.

initiate failover

set description

Managing a Switch Stack

Enter Global Configuration mode.

Change the switch ID number. The valid range is 1-10.

Changing the ID number causes all switches in the

stack to be reset to perform stack master renumbering. The

running configuration is cleared when the units reset.

Enter Global Stack Configuration mode.

Move the management switch functionality from the

master switch to the standby switch.

Specify the stack member that will come up as the master

if a stack failover occurs.

Configure a description for the specified stack member.

PowerConnect

Show Quick Links

Table of Contents