Table of Contents
Advertisement
For Parts Call K&T 606-678-9623 or 606-561-4983
COOLING SYSTEM (See Fig. 14)
Your engine is air cooled. For proper engine performance
and long life keep your engine clean.
•
Clean air screen
frequently using a stiff-bristled
brush.
•
Remove blower housing and clean as nec es sary.
•
Keep cylinder fi ns free of dirt and chaff.
CYLINDER FINS
MUFFLER
FIG. 14
MAINTENANCE
MUFFLER
Do not operate tiller without muffl er. Do not tamper with
exhaust system. Damaged muffl ers or spark arresters could
create a fi re hazard. Inspect pe ri odi cally and re place if
nec es sary. If your engine is equipped with a spark arrester
screen assembly, re move every 50 hours for cleaning and
inspection. Re place if dam aged.
SPARK PLUG
Replace spark plugs at the beginning of each tilling sea-
BLOWER
HOUSING
son or after every 50 hours of use, whichever comes fi rst.
Spark plug type and gap setting is shown in "PRODUCT
SPEC I FI CA TIONS" on page 3 of this man ual.
AIR SCREEN
TRANSMISSION
Your transmission is sealed and will only require lubrica-
tion if serviced.
CLEANING
Do not clean your tiller when the engine and transmission
are hot. We do not rec om mend using pressurized water
(gar den hose, etc.) to clean your unit un less the gasket
area around the trans mis sion and the engine muf fl er, air
fi l ter and car bu re tor are cov ered to keep wa ter out. Wa ter
in en gine will short en the useful life of your tiller.
•
Clean engine, wheels, fi nish, etc. of all foreign mat-
ter.
•
Keep fi nished surfaces and wheels free of all gas o line,
oil, etc.
•
Protect painted surfaces with au to mo tive type wax.
12
www.mymowerparts.com
Advertisement
Table of Contents
