Table of Contents
Advertisement
Installing the Cisco VG310 and Cisco VG320 Voice Gateways
Before You Begin
When a modem is connected to the auxiliary port, a remote user can dial in to Cisco VG310 or Cisco VG320
and configure it. Use the console cable and the DB-9-to-DB-25 connector adapter that comes with the accessory
kit.
For information on cabling, see
Procedure
Step 1
Connect the RJ-45 end of the adapter cable to the AUX port on the voice gateway.
Step 2
Connect the other end of the cable to the connector on the modem.
See the figure in
Connecting a Gigabit Ethernet Port to a Gigabit Ethernet Switch
Procedure
Step 1
Connect the cable from a Gigabit Ethernet port to an available port on the Gigabit Ethernet switch.
Step 2
If required, connect the second cable.
Ports and Cabling
The following table summarizes typical WAN, LAN, and voice connections for your Cisco VG310 or Cisco
VG320 voice gateway. For more information on cabling, see
Table 11: WAN, LAN, and Voice Connections
Port or Connection
Ethernet
OL-31292-01
Cable Specifications and Information, on page
LAN and Power Cables, on page
Port Type, Color
RJ-45, yellow
Cisco VG310 and Cisco VG320 Voice Gateways Hardware Installation Guide
Connecting a Gigabit Ethernet Port to a Gigabit Ethernet Switch
35.
Cable Specifications and
Connection
Ethernet hub or Ethernet
switch
69.
Information.
Cable
Category 5 or higher
Ethernet
43
Hide quick links:
Advertisement
Table of Contents
