Outdoor Unit Clearances - LG LA090HYV1 Engineering Manual

Single zone art cool premier wall mounted

Engineering manual (65 pages)

Installation manual (62 pages)

Table of Contents

minimum Clearance requirements for Single-zone Art Cool Premier Systems

Proper clearance for the outdoor unit coil is critical for proper unit operation. When installing the outdoor unit, consider service, inlet and

outlet and minimum allowable space requirements as illustrated in the diagrams below.

Specific clearance requirements in the diagram below are for the single-zone Art Cool Premier wall mount systems. Figure 12 shows the

Outdoor Unit Clearance

overall minimum clearances that must be observed for safe operation and adequate airflow around the outdoor unit.

Figure 12: outdoor Unit Clearances.

When placing the outdoor unit under an overhang, awning, sunroof or other "roof-like structure", observe the clearance requirements (as

shown in Figure 13) for height in relation to the unit. This clearance ensures that heat radiation from the condenser is not restricted around

the unit.

Adhere to all clearance requirements if installing the unit on a roof. Be sure to level the unit and ensure that the unit is adequately anchored.

Consult local codes for rooftop mounting requirements.

Do not place the unit where animals and/or plants will be in the path of the warm air, or where the warm air and/or noise will disturb neighbors.

In order to have successful service access to the out door unit, see Figure 14 for minimum spacing. When installing multiple outdoor units,

see Figure 15 for correct spacing requirements.

Figure 14: oDU Service Access Clearance - Single Unit.

ODU Service Access & Clearances

Unit: Inch

PlACemenT ConSiderATionS

Unit : inch

Due to our policy of continuous product innovation, some specifications may change without notification.