Ptt Express Voice Client; Figure 28: Ptt Express Default User Interface - Motorola MC40 User Manual
Hide thumbs
Also See for MC40:
- Integrator manual (203 pages) ,
- User manual (166 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
48 | Using the MC40
•
Touch
> About File Browser to view the application version information.
PTT Express Voice Client
Note:
PTT Express Voice Client creates Push-To-Talk (PTT) communication capability between disparate
enterprise devices. Leveraging existing Wireless Local Area Network (WLAN) infrastructure, PTT Express
delivers simple PTT communication without the need of a voice communication server.
•
Group Call: Press and hold the PTT (Talk) button to start communicating with other voice client users.
•
Private Response: Press and hold the Left Scan/Action (Private) button to respond to the originator of the last
broadcast or to make a Private Response.
PTT Audible Indicators
The following tones provide helpful cues when using the voice client.
•
Talk Tone: Double chirp. Plays when the Talk (or Private) button is depressed. This is a prompt for the user to
start talking.
•
Access Tone: Single beep. Plays when another user just finished a broadcast or response. The user is now able to
initiate a Group Broadcast or Private Response.
•
Busy Tone: Continuous tone. Plays when the Talk (or Private) button is depressed and another user is already
communicating on the same talkgroup. Plays after the maximum allowed talk time is reached (60 seconds).
•
Network Tone:
-
Three increasing pitch beeps. Plays when PTT Express has acquired the WLAN connection and the service is
enabled.
-
Three decreasing pitch beeps. Plays when PTT Express has lost the WLAN connection or the service is
disabled.
Figure 28: PTT Express Default User Interface
Send Feedback
| April 2014 | MN000111A02-A
Advertisement
Table of Contents
Troubleshooting
