Responding To A Group Broadcast; Responding With A Private Response; Responding With A Private Response With The Wired Headset; Disabling Ptt Express Voice Client Communication - Motorola MC40 User Manual
Hide thumbs
Also See for MC40:
- Integrator manual (203 pages) ,
- User manual (166 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
3 Release the button when finished talking.
Responding to a Group Broadcast
Procedure:
1 Wait until an access tone is heard.
2 Press and hold the Talk button, and listen for the talk tone to play.
If a busy tone is heard, release the Talk button and wait a moment before making another attempt. Ensure that
PTT Express and the WLAN are enabled.
3 Start talking after the talk tone plays.
4 Release the Talk button when finished talking.
Responding with a Private Response
The Private Response can only be initiated once a Group Call has been established. The initial Private Response is
made to the originator of the Group Call.
Procedure:
1 Wait until an access tone is heard.
2 Within 10 seconds, press and hold the Private Response Hard Button, and listen for the talk tone to play.
If a busy tone is heard, release the button and wait a moment before making another attempt. Ensure that PTT
Express and the WLAN are enabled.
3 Start talking after the talk tone plays.
4 Release the button when finished talking.
Responding with a Private Response with the Wired Headset
The Private Call can only be initiated once a Group Call has been established. The initial Private Response is made to
the originator of the Group Call.
Procedure:
1 Wait until an access tone is heard.
2 Within 10 seconds, press and release and then press and hold the Talk button, and listen for the talk tone to play.
If a busy tone is heard, release the button and wait a moment before making another attempt. Ensure that PTT
Express and the WLAN are enabled.
3 Start talking after the talk tone plays.
4 Release the button when finished talking.
Disabling PTT Express Voice Client Communication
Procedure:
1 Touch
.
2
Touch
.
3 Slide the Enable/Diable Switch to the OFF position. The button changes to OFF.
4 Touch
.
VoIP Telephony Ready
The MC40 VoIP telephony-ready models are optimized to support telephony VoIP functionality.
Using the MC40 | 51
MN000111A02-A | April 2014 |
Send Feedback
Advertisement
Table of Contents
Troubleshooting
