Insert The Sim Card And Battery; Remove The Sim Card; Charge The Battery; Switch On And Off - Nokia 1202 User Manual

Hide thumbs Also See for 1202:

Table of Contents

Get started

Press the release button (1), slide the back cover upwards (2), and remove it.

This phone is intended for use with the BL-4C battery.

Always switch the device off and disconnect the charger before removing the battery.

Insert the SIM card and battery

1. Lift the battery, and remove it (1).

2. Insert the SIM card (2). Ensure that the gold-coloured contact area is facing down

and the bevelled corner of the SIM card is slided in next.

3. Replace the battery and back cover (3, 4).

Press the release spring (1) and slide out the SIM card (2).

1. Connect the charger to a wall outlet.

2. Connect the charger to the phone. The battery indicator bar starts

scrolling. When the battery is fully charged, the bar stops scrolling.

Tip: To save energy, unplug the charger when the battery is fully

charged.

If the battery is completely discharged, it may take a few minutes before the charging

indicator appears on the display or before any calls can be made.

Press and hold the end key.

Use the phone only in its normal operating position.

Your device may have internal and external antennas. As with any radio

transmitting device, avoid touching the antenna area unnecessarily while

the antenna is transmitting or receiving. Contact with such an antenna affects the

communication quality and may cause the device to operate at a higher power level

than otherwise needed and may reduce the battery life.

Table of Contents

Show Quick Links

Table of Contents