Table of Contents
Advertisement
Function Code Table
The operator panel functions and descriptions are listed in the following table. For
details about the function, see "Operator Panel Function Descriptions" on page 206.
Notes:
1. The x can be any number 0 through 9, any letter A through F, or a blank.
2. Bold function codes indicate user supported codes.
Table 2. Operator Panel Function Codes
Function Code
01 xxxx xxxx
02 xxxx xxxx
03 xxxx xxxx
04 xxxx xxxx
05 xxxx xxxx
06 xxxx xxxx
07 xxxx xxxx
08 xxxx xxxx
09 xxxx xxxx through 10 xxxx
xxxx
11 xxxx xxxx through 19 xxxx
xxxx
20 xxxx xxxx
21 xxxx xxxx
22 xxxx xxxx
23 xxxx xxxx
204
S80 and S85 User's Guide
Function Selected
Pressing the Enter button toggles between:
v Display the currently selected IPL type.
v Display the currently selected IPL speed override for the next
IPL.
v Pressing the Enter button once allows selection of the IPL
types A or B
Attention: IPL types C and D are for trained service
personnel only and may cause data loss if used improperly.
v Pressing the Enter button twice allows selection of an IPL
speed override for the next IPL. Subsequent IPLS are
performed at the system selected speed.
Start an IPL and load the system. The IPL uses the selected
IPL options.
Note: This may cause the system to power off and then back
on.
Lamp test; all displays and indicators are switched on.
Informational System Power Control Network (SPCN) system
reference code (SRC); displays an SRC on the operator panel.
Note: Function 5 reference codes will only be displayed if the
function code is changed from the default function 11 position.
Reserved
Attention: This function allows concurrent maintenance to be
performed by trained service personnel. Inadvertent use may
cause system failures.
Fast power off.
Reserved
System reference code (SRC); displays an SRC on the
operator panel.
Note: Function 12 displays informational status codes and is
not used.
Reserved
Reserved
Initiates AIX dump.
Reserved
Advertisement
Chapters
Table of Contents
