free hit counter
Xtralis ADPRO FastTrace 2 series Installation Manual
  1. Manuals
  2. Brands
  3. Xtralis Manuals
  4. Security System
  5. ADPRO FastTrace 2 series
  6. Installation manual

Xtralis ADPRO FastTrace 2 series Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

®
ADPRO
FastTrace™ 2
Series
Hardware

Installation Manual

March 2015
Doc. 21790_05
Firmware version XOa 3.00.0003

Advertisement

Table of Contents
loading

Related Manuals for Xtralis ADPRO FastTrace 2 series

Summary of Contents for Xtralis ADPRO FastTrace 2 series

  • Page 1: Installation Manual

    ® ADPRO FastTrace™ 2 Series Hardware Installation Manual March 2015 Doc. 21790_05 Firmware version XOa 3.00.0003...

  • Page 3: Document Conventions

    Total Liability To the fullest extent permitted by law that any limitation or exclusion cannot apply, the total liability of Xtralis in relation to the products is limited to: (i) in the case of services, the cost of having the services supplied again; or (ii) in the case of goods, the lowest cost of replacing the goods, acquiring equivalent goods or having the goods repaired.
  • Page 4 Hardware Installation Manual ADPRO Trade Name Statement ADPRO is a registered trademark of Xtralis Pty Ltd. Contact Us UK and Europe +44 1442 242 330 D-A-CH +49 431 23284 1 The Americas +1 781 740 2223 Middle East +962 6 588 5622 Asia +86 21 5240 0077 Australia and New Zealand +61 3 9936 7000 www.xtralis.com...

  • Page 5: Table Of Contents

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Contents Technical Specifications ........................9 Specific FastTrace Configurations ....................12 FastTrace 2 Lite ......................... 12 FastTrace 2X ..........................12 FastTrace 2E ..........................13 System License ......................... 13 Hard Disks ............................15 Required Hard Disk Capacity ....................15 Adding/Replacing a Hard Disk ....................
  • Page 6 FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Main and Extension I/O Cards ......................48 Features ............................. 48 Possible Configurations ......................48 Ordering Information ........................ 49 Physical Position ........................49 Settings on the Main I/O Card ....................50 Installation ..........................50 Reset Signal Details ........................
  • Page 7 FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Ethernet Card ............................78 12.1 Installation ..........................78 12.2 Ethernet Settings ........................78 DTC Card .............................. 79 PTZ Cameras ............................80 14.1 Serial PTZ on MIO Card ......................80 14.2 PTZ via DTC ..........................81 14.3 PTZ via USB Converters ......................
  • Page 8 FastTrace™ 2 Series ® Hardware Installation Manual ADPRO 21790_05...

  • Page 9: Technical Specifications

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Technical Specifications FastTrace™ series. It has been ® The FastTrace 2 unit is the current video security system within the ADPRO developed as a high performance video security unit that can either be managed by CMS software (e.g.
  • Page 10 FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Video output VGA connector; adjustable resolution (up to SXGA) With MiTAC PH10LU motherboard: DVI-I or DP (DisplayPort) Video compression H.264 Audio compression The audio compression depends on the camera type. Bandwidth Remotely adjustable: compression, fps, and quality. You can specify a bandwidth limit.
  • Page 11 Please use the reference numbers in this document (for example #17434080) for ordering parts with Xtralis, or for identifying the correct required part. If a part is indicated by a reference number ending in an asterisk (for example #1729121*), this indicates that several variants exist for the part (for example reference numbers #17291210 and #17291211).

  • Page 12: Specific Fasttrace Configurations

    (logon not required for commercial datasheets). Note The FastTrace 2 Lite has become obsolete. Xtralis no longer provides it. FastTrace 2X The FastTrace 2X has been developed as a more powerful video system with higher performance and more efficient operation.

  • Page 13: Fasttrace 2E

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual FastTrace 2E The FastTrace 2E is the latest hardware in the ADPRO® FastTrace™ 2 series. It has been developed as a powerful video system with high performance and more efficient operation to replace the former FastTrace units.
  • Page 14 FastTrace™ 2 Series ® Hardware Installation Manual ADPRO FastTrace 2 video system). For more information on uploading licenses, see the XOa Client Software User Manual. Note The system license is locked on the FastTrace 2 motherboard and is therefore system specific: the license must include the correct MAC address.

  • Page 15: Hard Disks

    Required Hard Disk Capacity As there are lots of configuration possibilities, Xtralis has a hard disk space calculator available. You can find this hard disk space calculator on the CD/DVD provided with your FastTrace 2 video system, or you can download it from our website www.xtralissecurity.com.

  • Page 16: Using The Xoa Client Software

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO The screen displays the following information: Device Indicates the specific hard disk Power status The power status column displays one of the following statuses:  ERROR  there is a problem retrieving the power status of the drive ...

  • Page 17: Material List (For 1 Hard Disk)

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Material List (for 1 Hard Disk) Part Amount+ Reference Number Support for disk 2 1 x #1729121* Support for disk 3 and 4 1 x #1729122* Disk screws 4 x #17434080 or #17434060 Dented washers M4 4 x #17720050 Mounting screws...
  • Page 18 FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Fix the second disk to the support #1729121* with the screws #17434080 or #17434060 and dented washers M4 #17720050. Fix the support to the casing with 4 screws (#17439080): 2 at the front, and 2 at the left side of the casing.
  • Page 19 FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Fix the third disk on the top side of the support for disk 3 and 4. If necessary, fix the fourth disk on the bottom side of the same support. Note Make sure to install the disk on the top side of the support first. Fix the support to the casing with 4 screws (#17439080): 2 at the front, and 2 at the right side of the casing.

  • Page 20: Adding Hard Disks With An Intel Dh61Be Motherboard

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO If the SATA cables do not have a locking mechanism, use tie-wraps to secure the cables on the disk(s) in the following way: If there are unused cables left, bundle them with tie-wraps. Fix the front plate (#17011610) on the base with the screws (#17444080).
  • Page 21 FastTrace™ 2 Series ® ADPRO Hardware Installation Manual You can now see the mounting holes for the disk bays: Fix the second disk to the support #1729121* with the screws #17434080 or #17434060 and dented washers M4 #17720050. Fix the support to the casing with 4 screws (#17439080): 2 at the front, and 2 at the left side of the casing.
  • Page 22 FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Fix the third disk on the top side of the support for disk 3 and 4. If necessary, fix the fourth disk on the bottom side of the same support. Note Make sure to install the disk on the top side of the support first. Fix the support to the casing with 4 screws (#17439080): 2 at the front, and 2 at the right side of the casing.

  • Page 23: Boot Problems After Adding A Hdd With The Dh61Be Motherboard

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual If the SATA cables do not have a locking mechanism, use tie-wraps to secure the cables on the disk(s) in the following way: If there are unused cables left, bundle them with tie-wraps. Fix the front plate (#1701164x or #1701166x) on the base with the screws (#17444080).

  • Page 24: Adding Hard Disks With A Mitac Ph10Lu Motherboard

    Use the + and – keys to move the D.O.M. in the list. Press Enter to confirm. Choose Exit, and then choose Exit & Save Changes. Choose Yes to confirm. The server continues booting. If booting is successful, the Xtralis start window appears. Adding Hard Disks with a MiTAC PH10LU Motherboard To add one or more hard disks with a MiTAC PH10LU motherboard, proceed as follows: Switch off the power supply and remove the lid.
  • Page 25 FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Fix the support to the casing with 4 screws (#17439080): 2 at the front, and 2 at the left side of the casing. Connect the disk to the SATA2 connector on the motherboard with the SATA cable (#1652087*). For the power supply to the disk, connect the remaining SATA power connector on the power cable of disk 1 (not the one on the tail end;...
  • Page 26 FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Fix the support to the casing with 4 screws (#17439080): 2 at the front, and 2 at the right side of the casing. Connect disk 3 to the SATA3 connector on the motherboard with a SATA cable (#1652087*). If necessary, connect disk 4 to the SATA4 connector on the motherboard with a SATA cable (#1652087*).

  • Page 27: Raid 1 Support

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual If there are unused cables left, bundle them with tie-wraps. Fix the front plate (#1701164x or #1701166x) on the base with the screws (#17444080). Put the cover in place and secure with 10 screws (#17439080). Connect a monitor/screen and keyboard to the FastTrace 2 server.

  • Page 28: Activating Raid 1

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO 3.9.2 Activating RAID 1 RAID 1 requires a minimum of 2 hard disks. The size of the RAID 1 recording combination is the smaller of the 2 disks installed in your server. If, for example, you have a 1 TB disk and a 2 TB disk, the RAID 1 recording disk has a 1 TB capacity.

  • Page 29: Fan Speed Selection

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Fan Speed Selection Two large fans dissipate the heat. The fans have a switch to select the speed: low, medium, or fast. For most ambient temperatures, you can set the fan speed to medium. Change the fan speed only for extreme ambient temperatures.

  • Page 30: Front Led Indicators

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Front LED Indicators Overview There are 3 LEDs on the front of the server: Green LED Power is on Yellow LED Fault Blue LED Storage media activity If the yellow LED lights up, check the status of your server. For more information, see the XOa Client Software User Manual.

  • Page 31: Led Connections With Main I/O Card

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual LED Connections with Main I/O Card In a system with a Main I/O card, the LED board is connected to the Main I/O card. Main I/O card 6-pole LED connector Red conductor Front LED board 21790_05...

  • Page 32: Required Motherboard

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Required Motherboard Overview The FastTrace 2 video system only operates with an Intel DG31PR, Intel DG41TY, Intel DH55TC, Intel DH61BE, or MiTAC PH10LU motherboard. Intel DG31PR motherboard Intel DG41TY motherboard Intel DH55TC motherboard Intel DH61BE motherboard MiTAC PH10LU motherboard BIOS Settings...

  • Page 33: Intel Dh61Be Motherboard

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Choose Advanced > Event log > Event logging and select the option Disable. Choose Advanced > Chipset Configuration > HPET and select the option Disable. Choose Power > After Power Failure and select the option Power-On. Choose Exit >...

  • Page 34: Extension Boards

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Extension Boards Overview Type Description HIPI PCI Express extension board for 8 IP cameras. (Not compatible with MiTAC PH10LU motherboard) See also technical datasheet 19531930 – HIPI card. Ethernet For FastTrace 2E only: Ethernet connection for IP camera network up to 32 IP cameras.

  • Page 35: General Rules

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual General Rules The FastTrace 2 video system offers 6 extension slots:  On Intel DG31PR and Intel DG41TY motherboards: two PCI Express slots, two PCI slots, and two physical slots.  On Intel DH55TC and Intel DH61BE motherboards: three PCI Express slots, one PCI slot, and two physical slots.
  • Page 36 Main I/O Extension I/O A/V with 4 or 8 channels (highest camera numbers: CAM 5/9 > 8/16) Extension I/O Main I/O 7.3.1.3 The Xtralis Configurations Analogue Cameras (4 – 8 – 12 – 16 Channels) Slot Type Extension Card PCI Express...

  • Page 37: With Intel Dg41Ty Motherboard

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Hybrid (16 Channels) Slot Type Extension Card PCI Express HIPI (ETH1) PCI Express Extension I/O 2 Main I/O 2 A/V 8 channels 1 Extension I/O 1 Main I/O 1 7.3.2 With Intel DG41TY Motherboard 7.3.2.1 Network/Monitor/Keyboard Note You must restart the XOa client software after connecting devices to a USB port.
  • Page 38 Main I/O Extension I/O A/V with 4 or 8 channels (highest camera numbers: CAM 5/9 > 8/16) Extension I/O Main I/O 7.3.2.3 The Xtralis Configurations Analogue Cameras (4 – 8 – 12 – 16 Channels) Slot Type Extension Card PCI Express...

  • Page 39: With Intel Dh55Tc Motherboard

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual 7.3.3 With Intel DH55TC Motherboard 7.3.3.1 Network/Monitor/Keyboard Note You must restart the XOa client software after connecting devices to a USB port. USB input 1 (/dev/ttyU1) is reserved for an external modem. 7.3.3.2 Extension Slots Slot Type...
  • Page 40 Example: camera numbers 1–4 allocated to the 4CH A/V card, and numbers 5–12 allocated to the 8CH A/V card. Note Only the A/V cards type DS42xx are allowed on the Intel DH55TC motherboard. 7.3.3.3 The Xtralis Configurations Analogue Cameras (4 Channels) Slot Type...

  • Page 41: With Intel Dh61Be Motherboard

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual IP Cameras (8 or 16 Channels) Slot Type Extension Card PCI Express HIPI (ETH1) PCI Express HIPI (ETH2) PCI Express Extension I/O 2 Main I/O 2 Extension I/O 1 Main I/O 1 Hybrid (12 Channels) Slot Type...
  • Page 42 Note Only the A/V cards type DS42xx are allowed on the Intel DH61BE motherboard. 7.3.4.3 The Xtralis Configurations for FastTrace 2 Units From December 2013 onwards the FastTrace 2 will only be available as an analogue-only unit. Existing FastTrace 2 IP and/or Hybrid units can no longer be expanded.
  • Page 43 FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Slot Type Extension Card PCI Express Extension I/O 2 Main I/O 2 Extension I/O 1 Main I/O 1 Analogue Cameras (8 Channels) Slot Type Extension Card PCI Express A/V 8 channels 1 (DS42xx) PCI Express PCI Express Extension I/O 2...
  • Page 44 PCI Express HIPI (ETH1) PCI Express Extension I/O 2 Main I/O 2 Extension I/O 1 Main I/O 1 7.3.4.4 The Xtralis Configurations for FastTrace 2E Units Analogue Cameras (4 Channels) Slot Type Extension Card PCI Express A/V 4 channels 1 (DS42xx)
  • Page 45 FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Slot Type Extension Card Main I/O 2 Extension I/O 1 Main I/O 1 If you want to use a second Extension I/O card, you have to replace either the Ethernet card or one of the analogue video cards in the PCI Express slots.

  • Page 46: With Mitac Ph10Lu Motherboard

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Hybrid (up to 32 Channels* with 1 Ethernet Card) Slot Type Extension Card PCI Express A/V 4 or A/V 8 or A/V 16 channels PCI Express Ethernet Card PCI Express Extension I/O 2 Main I/O 2 Extension I/O 1 Main I/O 1...
  • Page 47 FastTrace™ 2 Series ® ADPRO Hardware Installation Manual 7.3.5.2 The Xtralis Configurations The table below shows the possible configurations with a MiTAC PH10LU motherboard: Slot – – Type Express Express Express Express – Analogue 4 ch A/V 4 ch –...

  • Page 48: Main And Extension I/O Cards

    Main and Extension I/O Cards Features Note With the FastTrace 2E Series, Xtralis introduced the Next Generation I/O cards. If you are using Next Generation cards with your FastTrace 2E unit, see Main and Extension I/O Cards Next Generation on page 57.

  • Page 49: Ordering Information

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Ordering Information Use these reference numbers to place your order with Xtralis: Item Reference Number Main I/O card 39544070 Main I/O card plus mounting set 39544000 Extension I/O card 39544080 Extension I/O card plus mounting set...

  • Page 50: Settings On The Main I/O Card

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Settings on the Main I/O Card If you are connecting PTZ cameras from the same RS-485 bus to multiple FastTrace 2 servers, set the RS-485 PTZ jumper on the Main I/O card to the 2-wire (PTZ) position. RS-485 cable length: max.
  • Page 51 FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Remove the two cables that connect the LED board on the front to the motherboard. The LEDs will be powered from the Main I/O card (of the 1 set). Before inserting the Main I/O card into the motherboard, connect all necessary cables to the card. See the table below for an overview of cable connections.
  • Page 52 FastTrace™ 2 Series ® Hardware Installation Manual ADPRO DG41TY motherboard AUDIO (to MIO card), use adapter #16500660 USB (to MIO card) Reset (to MIO card) DH55TC motherboard AUDIO (to MIO card) USB (to MIO card) Reset (to MIO card) 21790_05...

  • Page 53: Reset Signal Details

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual DH61BE motherboard AUDIO (to MIO card) USB (to MIO card), use adapter #16500660 Reset (to MIO card) PH10LU motherboard AUDIO (to MIO card) USB (to MIO card), use adapter #16500665 Reset (to MIO card) Reset Signal Details Connector –...

  • Page 54: Adding An Extension I/O Card

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Note Check the polarity! If you reverse the connection, the motherboard receives a permanent reset signal. Adding an Extension I/O Card 8.8.1 Settings on the Extension I/O Card From Main I/O card (#21760300) Jumper setting: normally open relay contact Jumper setting: normally closed relay contact 8.8.2 Installation...

  • Page 55: Adding A Second Set Of I/O Cards

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Adding a Second Set of I/O Cards Flat cable (#21760300) Flat cable (#21760300) EIO 2 MIO 2 EIO 1 MIO 1 Red conductor = pin 1 To motherboard AUDIO connector To motherboard USB connector (MIO 1 only) Flat cable (#16540260) To insert a second set of I/O cards, proceed as follows: Insert all cards into appropriate slots (see Physical...

  • Page 56: Configuring The Internal I/O Cards

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO 8.11 Configuring the Internal I/O Cards The FastTrace 2 server automatically detects all connected MIO and EIO cards. To configure the inputs and outputs, see the XOa Client Software User Manual. 8.12 Input Circuits Use the ADPRO XOa client to configure the inputs as NEOL, SEOL, or DEOL.

  • Page 57: Main And Extension I/O Cards Next Generation

    2 x Main I/O + 1 x Extension I/O  2 x Main I/O + 2 x Extension I/O Ordering Information Use these reference numbers to place your order with Xtralis: Item Reference Number Main I/O card plus mounting set...

  • Page 58: Material List

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Material List 9.4.1 Main I/O Card with Mounting Set (#39544000) Part Amount + Reference Number Main I/O card 1 x #39544070 (incl. mounting bracket, (1 x #17291161) M3 screws, (2 x #17439030) and hex spacers) (2 x #17210070) Part...
  • Page 59 FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Part Amount + Reference Number Flat cable (6 pins x 35 cm) 1 x #21760101 Flat cable (10 pins x 20 cm) for USB 1 x #16540260 Flat cable (10 pins x 30 cm) for audio 1 x #16540280 Reset cable 1 x #21760402...

  • Page 60: Extension I/O Card With Mounting Set (#39544010)

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO 9.4.2 Extension I/O Card with Mounting Set (#39544010) Part Amount + Reference Number Extension I/O card 1 x #39544080 (incl. mounting bracket, (1 x #17291161) M3 screws, and (2 x #17439030) hex spacers) (2 x #17210070) Flat cable (26 pins) 1 x #21760300...
  • Page 61 FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Mounting on chassis: I/O card, bottom side Locknut (#17439010) M3 stud Chassis L-shaped metal bracket (#17291141) – on top side Screw M2.5 (#17420060) Nut M2.5 (#17429000) Dented washer M2.5 (#17720090) PCI connector: I/O card, bottom side PCI inserter (#17291100) Motherboard...

  • Page 62: Settings On The Main I/O Card

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Settings on the Main I/O Card If you are connecting PTZ cameras from the same RS-485 bus to multiple FastTrace 2 servers, set the RS-485 PTZ jumper on the Main I/O card to the 2-wire (PTZ) position. RS-485 cable length: max.
  • Page 63 FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Remove the two cables that connect the LED board on the front to the motherboard. The LEDs will be powered from the Main I/O card (of the 1 set). Remove the female connectors (A, see figure below) from the Main I/O card before installing. Before inserting the Main I/O card into the motherboard, connect all necessary cables to the card.
  • Page 64 FastTrace™ 2 Series ® Hardware Installation Manual ADPRO DG41TY motherboard AUDIO (to MIO card), use adapter #16500660 USB (to MIO card) Reset (to MIO card) DH55TC motherboard AUDIO (to MIO card) USB (to MIO card) Reset (to MIO card) 21790_05...

  • Page 65: Reset Signal Details

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual DH61BE motherboard AUDIO (to MIO card) USB (to MIO card), use adapter #16500660 Reset (to MIO card) PH10LU motherboard AUDIO (to MIO card) USB (to MIO card), use adapter #16500665 Reset (to MIO card) Reset Signal Details Connector –...

  • Page 66: Adding An Extension I/O Card

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Note Check the polarity! If you reverse the connection, the motherboard receives a permanent reset signal. Adding an Extension I/O Card 9.9.1 Settings on the Extension I/O Card From Main I/O card (#21760300) No settings are required on the Extension I/O card.

  • Page 67: Adding A Second Set Of I/O Cards

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual 9.10 Adding a Second Set of I/O Cards Flat cable (#21760300) Flat cable (#21760300) EIO 2 MIO 2 EIO 1 MIO 1 Red conductor = pin 1 To motherboard AUDIO connector To motherboard USB connector (MIO 1 only) Flat cable (#16540260) To insert a second set of I/O cards, proceed as follows: Insert all cards into appropriate slots (see Physical...

  • Page 68: Connecting Inputs/Outputs

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Warning! Although the pictures below show only the connector, it is strongly recommended to connect the wires with the connectors plugged into the card. Wiring a handheld connector may cause injuries. 9.11.2 Connecting Inputs/Outputs Wiring to Dinkle and Phoenix connectors is identical;...

  • Page 69: Input Circuits

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual 9.13 Input Circuits Use the ADPRO XOa client to configure the inputs as NEOL, SEOL, or DEOL. Normally open – SEOL Normally open – NEOL Short circuit = alarm Short circuit = alarm 1K1 = idle Open circuit = idle Open circuit = tamper...

  • Page 70: Required Encoder (A/V) Card

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Required Encoder (A/V) Card You use different video cards (encoder cards) with different motherboards in the FastTrace 2 video system:  Use DS40xx-HCI encoder cards with the Intel DG31PR and Intel DG41TY motherboards. ...

  • Page 71: Replacing A Video Card

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual audio compression OggVorbis Codec 16 kbps (DS40xx cards) OggVorbis Codec G711 (DS42xx cards) bandwidth Compression, fps, and quality are remotely adjustable. You can specify a bandwidth limit in the XOa client software. bandwidth 6 fps CIF/SIF: 70 kbps consumption...

  • Page 72: Adding A Video Card

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO It is recommended to return the faulty video card to your reseller. Switch on the power supply and reboot the video system. The replacement part will include a new license. Upload the received license file to the server. For more information on uploading files to the video system, see the XOa Client Software User Manual.

  • Page 73: Video Input Termination (75 Ohm/High Impedance)

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual 10.5 Video Input Termination (75 Ohm/High Impedance) This is only available on the latest version of the 8 or 16 channel video cards. Jumpers JP1–JP8/16 determine whether the corresponding video input is terminated with 75 ohm (if jumper is placed) or not (if jumper is removed).

  • Page 74: Hipi Card For Ip Cameras

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO HIPI Card for IP Cameras The HIPI card offers an isolated LAN network (10/100/1000 Mbps on RJ45 connector) to connect IP cameras. Note The HIPI card can also function as Ethernet card from version 2.9 onwards. The HIPI card is no longer used for new FastTrace 2 units.
  • Page 75 FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Note The HIPI Ethernet interfaces use ETH1 and/or ETH2, not ETH0. In case of 2 HIPI cards with IP only, there is no restriction in which camera is connected to which port. A 16-camera network can be connected to a single port.

  • Page 76: Adding A Hipi Card

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO 11.2 Adding a HIPI Card Use these reference numbers when ordering your HIPI card with Xtralis: Extension Board Reference Number HIPI card: card only 39544300 Hybrid HIPI card: card + mounting set 39544320 11.2.1 Placement on the Intel DG31PR Motherboard...

  • Page 77: Placement On The Intel Dh55Tc Motherboard

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual 11.2.3 Placement on the Intel DH55TC Motherboard Insert the first HIPI card in PCI Express slot E. Insert the second HIPI card in PCI Express slot D. The card in slot E is assigned as ETH1 in the system. For more information, see the manual of the motherboard.

  • Page 78: Ethernet Card

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Ethernet Card 12.1 Installation FastTrace 2E units with Intel motherboards are standard equipped with an Ethernet card. Units with a MiTAC motherboard do not have an Ethernet card; the motherboard contains the necessary LAN connector. If you want to use an analogue-only system (with 2 video encoder cards) and you want to insert 2 I/O cards sets (2 Main I/O cards and 2 Extension I/O cards), you need to take out the Ethernet card and replace it with an I/O card.

  • Page 79: Dtc Card

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual DTC Card The DTC card offers down-the-coax PTZ control for analogue cameras. The DTC card is built in at the factory; you cannot order it separately. It is inserted on the back of the audio/video connection board. The DTC card requires software.

  • Page 80: Ptz Cameras

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO PTZ Cameras You can connect PTZ (Pan-Tilt-Zoom) cameras in one of the following ways for PTZ control:  on the Main I/O card  via a USB converter  via the coaxial interface (DTC card) Each method is described in detail below.

  • Page 81: Ptz Via Dtc

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual PTZ cameras Main I/O cards Next Generation 14.2 PTZ via DTC Some PTZ cameras can send the PTZ signal through the coax cable. If you want to use this, you must have your FastTrace 2 unit equipped with a DTC card.

  • Page 82: Presidium

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Presidium You can associate video outputs from a Presidium with FastTrace 2 analogue inputs. Use coax cables to connect the video outputs of the Presidium system to the video inputs of the FastTrace 2 video system for further analysis and recording.

  • Page 83: Modems

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Modems You can connect one modem to your server. Normally, you connect a classic PSTN (ISDN) modem with serial port to the server by means of the USB to RS-232 converter. This USB to RS-232 converter needs a specific FTDI chip. The Stollman TA+USBA is the only ISDN modem with USB interface that is supported on the FastTrace 2 unit (without having to use the converter).

  • Page 84: Audio

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Audio Not only video images can be used in the Live Video screen, also audio – both in and out – is possible. 17.1 Audio IN 17.1.1 Setup For cameras with an audio input, you can choose to record audio and listen to audio in the live view. Note If the connection bandwidth is low, it is recommended to disable live audio streaming.
  • Page 85 FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Wiring Diagram 17.1.2.2 ADPRO Microphones IMUSTD, IMUPIR, IMUTEMP Specifications  IMUSTD = standard microphone  IMUPIR = microphone with PIR detector appearance  IMUTEMP = microphone with heat detector appearance  Designed for indoor use ...
  • Page 86 FastTrace™ 2 Series ® Hardware Installation Manual ADPRO 17.1.2.3 ADPRO Audio Unit For more information, see the ADPRO Audio Unit Technical Datasheet. Wiring Diagram 21790_05...

  • Page 87: Audio Out

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual 17.2 Audio OUT 17.2.1 Setup There is one general audio output available on the server: either via the MIO or via the audio out plug of the motherboard (= green 3.5 mm jack). If necessary, you can add VM22A audio units. Audio outputs are available on one or two VM22A units, connected in cascade.

  • Page 88: Connecting The Vm22A Audio Switch

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Click the Volume button under the Voice recording heading. Adjust the vertical volume slide on the Mic volume or Line volume, depending on which device you are using. Click OK and close the Control Panel. Test with Sound Recorder.

  • Page 89: Connecting Pirs

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Connecting PIRs 18.1 Required PIR Firmware For a correct functioning of the PIR alarm processing, a minimal PIR firmware version 2.00 is required. Previous firmware versions also work with RS-485 communication, but do not support all features (e.g. Alarm Management).
  • Page 90 FastTrace™ 2 Series ® Hardware Installation Manual ADPRO (*) Some PIR models have separate 0V terminals for data and power; on other models there is only one common 0V terminal. The PIRs are powered locally by a power adapter. You can place locally powered PIR detectors at the maximum distance of 1200 m for RS-485 cables, but remember that this remains a 3-line communication (RS-485 + 0V).

  • Page 91: Connecting The Pir Detector Using The Usb To Rs-485 8-Channel Distribution Unit

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual (*) Some PIR models have separate 0V terminals for data and power; on other models there is only one common 0V terminal. The PIRs are powered locally by a power adapter. You can place locally powered PIR detectors at the maximum distance of 1200 m for RS-485 cables, but remember that this remains a 3-line communication (RS-485 + 0V).

  • Page 92: Connecting The Pir Detector Using A Usb To Serial Port Rs-485 Converter

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO A detailed view of one connected distribution unit: 18.2.3 Connecting the PIR Detector Using a USB to Serial Port RS-485 Converter Connect the PIR detector to the converter and plug the USB cable of the converter in the dev/ttyU2 USB port of the server.
  • Page 93 FastTrace™ 2 Series ® ADPRO Hardware Installation Manual You need to order the USB to serial port RS-485 converter separately (reference number 20415490). 21790_05...

  • Page 94: Network Load

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Network Load Application Bandwidth volume Alarm transmission Negligible Remote control (executing commands) Negligible Software update Volume of about 170 MB Configuration update Volume of 150 kB Video streaming 4CIF / 25 ips 400 kbps / camera 4CIF / 6 ips 140 kbps / camera...

  • Page 95: Current Consumption

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Current Consumption Estimated current consumption depends on the installed components and on the system load: Motherboard 16 W (Intel) Processor 25 W (AMD) Intel DG31, DG41: 65 W max. Intel DH55: 73 W max. Intel DH61: 77 W max.

  • Page 96: Retrieving The Ip Address

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Retrieving the IP Address Connect a monitor/screen and keyboard to the server. If the video matrix is active, press Ctrl+Alt+F1. The welcome screen appears: Video Security FastTrace 2E (XOa V3.00.003) 10.0.0.10 Subnet: 255.255.255.0 Gateway: 10.0.0.1 The welcome screen displays the following information:...

  • Page 97: Diagnostics

    In case of major troubles with the server, the system allows to generate a number of traces. In some cases, the Xtralis Support Division may ask you to activate and capture some traces and files that can be helpful to resolve any technical issues.
  • Page 98 FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Click the link on the web page. Click Save to store the file on your PC or a network folder. Do not try to find a program online, because this will provide unexpected websites. Click Open and choose Notepad as the default application.

  • Page 99: Retrieving Reports

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual 22.2 Retrieving Reports The server generates a number of reports. You can view these reports via the internet browser. Type the IP address of the server in the address bar of the browser and add /report.php to the IP address. Example: http://10.0.0.10/report.php The Server Report shows the following items: General...
  • Page 100 Netstat – all DEV stats Sockstat ARP cache Filesystem Mounts S.M.A.R.T Fsck Open files Free disk space Hardware Memory Mainboard Udev database Server Server version Server process memory usage Files Active config Contact the Xtralis Support Division for further assistance. 21790_05...

  • Page 101: Fasttrace 2 Web

    Here you can download the core dump (crash info) and watch dump (hang info) when you encounter these specific problems. The Xtralis Support Division may ask you to send these files to them for further investigation. Always mention the version when providing a core dump! phpshell.php...

  • Page 102: Maintenance

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO Maintenance 24.1 Replacing the Filters It is essential that the filters are regularly cleaned and – when needed – replaced by new filters. You need an Allen wrench (3 mm) to remove the front plate of the FastTrace 2 server. Remove the screws indicated by the white arrows on the image below and remove the front plate.

  • Page 103: Product Labelling

    Product Labelling 25.1 Labels All ADPRO products are labelled. Older systems: Device Marking on Device Marking on Package FastTrace 2 XTRALIS XTRALIS Security Solutions Security Solutions BELGIUM BELGIUM TYPE: ADPRO FastTrace 2 TYPE: ADPRO FastTrace 2 ASSY number 54VHHID0 – YYMM ASSY number 54VHHID0 –...

  • Page 104: Product Number Structure

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO 25.2 Product Number Structure 25.2.1 FastTrace 2 and FastTrace 2X Units Each product version has an 8-digit product number, indicating the installed options. The product number layout is made up as: 55 V HH I D 0 The FastTrace 2 product number The video channel type: ...

  • Page 105: Fasttrace 2E Units

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual 25.2.2 FastTrace 2E Units Each product version has an 8-digit product number, indicating the installed options. The product number layout is made up as: 58 VV HH I D The FastTrace 2E product number The video channel type: ...

  • Page 106: Declaration Of Conformity

    FastTrace™ 2 Series ® Hardware Installation Manual ADPRO 25.3 Declaration of Conformity Warning! The FastTrace 2 video system is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. 21790_05...

  • Page 107: Appendix A: Abbreviations

    FastTrace™ 2 Series ® ADPRO Hardware Installation Manual Appendix A: Abbreviations 3G: third generation GND: ground A: ampere GUI: graphical user interface AGC: automatic gain control HD: high definition AHCI: Advanced Host Controller Interface HDD: hard disk drive APN: Access Point Name HDMI: High-Definition Multimedia Interface HPET: High Precision Event Timer A/V card: audio/video card...
  • Page 108 FastTrace™ 2 Series ® Hardware Installation Manual ADPRO pF: picofarad SP: Service Pack PIN: personal identification number SPK: speaker PIR: passive infrared SVGA: Super Video Graphics Array PoE: power over Ethernet SXGA: Super Extended Graphics Array PPP: point-to-point protocol Sync: synchronisation PSTN: public switched telephone network TB: terabyte PTZ: pan tilt zoom...
  • Page 110 UK and Europe +44 1442 242 330 D-A-CH +49 431 23284 1 The Americas +1 781 740 2223 Middle East +962 6 588 5622 Asia +86 21 5240 0077 Australia and New Zealand +61 3 9936 7000 A Disclaimer about this document, statements about Intellectual Property, Copyrights, and Liability, as well as a General Warning are available in an earlier section of this document.

Table of Contents