Table of Contents
Advertisement
10 www.aeg.com
7. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer
to 'Setting and starting a pro-
gramme'.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
7.1 Using the detergent
D
A
3
7.2 Setting and starting a
programme
The Auto Off function
To decrease the energy consumption,
this function automatically deactivates
the appliance a few minutes after:
• You have not closed the door to start
the programme.
• The programme is completed.
A B
30
20
C
B
D
0
2 0
+
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
1.
Press the release button (B) to open
the lid (C).
2.
Put the detergent in the compart-
ment (A) .
3.
If the programme has a prewash
phase, put a small quantity of deter-
gent in the compartment (D).
4.
If you use detergent tablets, put the
tablet in the compartment (A).
5.
Close the lid. Make sure that the re-
lease button locks into position.
A
-
C
Setting mode
For some settings it is necessary that the
appliance is in setting mode.
The appliance is in setting mode when,
after the activation, the indicator of
duration of the programme.
If the control panel does not show this
condition, press and hold, at the same
time
cator of
• If you use the combi detergent
tablets, activate the multitab op-
tion.
for the type of load and the degree
of soil.
is on and the display shows the
and
comes on.
until the indi-
Advertisement
Table of Contents
