Table of Contents
Advertisement
Table 2. Firmware Checkpoints (continued)
Checkpoint
E595
E59E
E5E0
E5E1
E5E2
E5E3
E5E4
E5E5
E5E6
E5E7
E5E8
E5E9
E5EE
E5EF
150
EserverpSeries 615 Service Guide
Description
Detected valid adapter in slot
End of walking bus of current EADS
Initialize system processor array
Reserved
Initialization of the hypervisor, phase 1
Not in quick-restart: load and set up open
firmware code in memory
Activate slave processors
Initialize the hypervisor, phase 2
Set L2 and processor status
Save I/O hub information for RTAS and
open firmware
Set up registers
Reset the quick restart path
Hang state in main control code
End of low-level firmware
Action/
Possible Failing FRU
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 110.
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 110.
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 110.
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 110.
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 110.
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 110.
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 110.
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 110.
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 110.
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 110.
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 110.
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 110.
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 110.
Advertisement
Table of Contents
