Initial Configuration; Subsequent Use - Honeywell MX9 Reference Manual
Microsoft windows mobile 6.5 operating system
Hide thumbs
Also See for MX9:
- Reference manual (360 pages) ,
- User manual (356 pages) ,
- User manual (66 pages)
Table of Contents
Advertisement
Initial Configuration
1. Select Start > Settings > System > Bluetooth or tap the Bluetooth icon at the bottom of the Today panel.
2. Tap the Settings Tab.
3. Change the Computer Friendly Name at the bottom of the
determined by the factory installed software version. Honeywell strongly urges assigning every MX9 a unique name (up
to 32 characters) before Bluetooth Discovery is initiated.
4. Check or uncheck the MX9 Bluetooth options on the Settings tab and the Reconnect tab.
5. Tap the OK button to save your changes.
Subsequent Use
Note:
Today panel icon and Bluetooth device Icon states change as Bluetooth devices are discovered, paired, connected
and disconnected. A Today panel Bluetooth icon with a red background indicates Bluetooth is active and not paired
with any device. A device icon with a red background indicates a disconnected paired device.
1. Tap the Bluetooth icon at the bottom of the Today panel to open the Bluetooth LXEZ Pairing application.
2. Tap the Bluetooth Devices tab.
3. Tap the Discover button. When the Bluetooth module begins searching for in-range Bluetooth devices, the button name
changes to Stop. Tap the Stop button to cancel the Discover function at any time.
4. The discovered devices are listed in the Bluetooth Devices window.
5. Highlight a Bluetooth device in the Discovered window and double-tap to open the device properties menu.
6. Tap Pair as Scanner to set up the MX9 to receive scanner data.
7. Tap Pair as Printer to set up the MX9 to send data to the printer.
8. Tap Serial Device (when Filtered mode is disabled) to set up the MX9 to communicate with a Bluetooth serial device.
9. Tap HID Device to pair a HID device.
10. Tap PAN Device to pair a PAN device.
11. Tap DUN Device to pair a DUN device.
12. Tap Disconnect to stop pairing with the device. Once disconnected, tap Clear to remove the device name and data
from the MX9 Bluetooth Devices list. Select Yes at the "Delete all disconnected devices? Yes / No" dialog box.
Upon successful pairing, the selected device may react to indicate a successful connection. The reaction may be an audio
signal from the device, flashing LED on the device, or a dialog box is placed on the MX9 display.
Whenever the MX9 is turned On, all previously paired, live, Bluetooth devices in the vicinity are paired, one at a time, with the
MX9. If the devices cannot connect to the MX9 before the re-connect timeout time period expires (default is approximately 20
seconds for each paired device) there is no indication of the continuing disconnect state if
disabled.
Settings
panel. The Bluetooth MX9 default name is
Report Failure to Reconnect
is
4-77
Advertisement
Table of Contents
