Bluetooth Bar Code Reader Setup; Introduction - Honeywell MX9 Reference Manual
Microsoft windows mobile 6.5 operating system
Hide thumbs
Also See for MX9:
- Reference manual (360 pages) ,
- User manual (356 pages) ,
- User manual (26 pages)
Table of Contents
Advertisement
Bluetooth Bar Code Reader Setup
Please refer to the Bluetooth scanner manufacturer's User Guide; it may be available on the manufacturer's web site. Contact
technical assistance
for Bluetooth product assistance.
Introduction
Honeywell supports several different types of bar code readers. This section describes the interaction and setup for a mobile
Bluetooth laser scanner or laser imager connected to the MX9 using Bluetooth functions.
Prerequisites
The MX9 must have the Bluetooth hardware and software installed. An operating system upgrade may be required.
l
Contact
technical assistance
If the MX9 has a Bluetooth address identifier bar code label affixed, then Bluetooth hardware and software are installed.
l
The mobile Bluetooth laser scanner / laser imager battery is fully charged.
l
The MX9 main battery is fully charged. Alternatively, the MX9 may be cabled to AC/DC power.
l
Important: The bar code numbering examples in this segment are not real and should not be created or scanned with a
l
Bluetooth scanner.
To open the LXEZ Pairing program, tap Start > Settings > System > Bluetooth or tap the Bluetooth icon at the bottom
l
of the Today panel.
Locate the bar code label, similar to the sample shown above, attached to the MX9. The label is the Bluetooth address identifier
for the MX9.
The mobile Bluetooth scanner / imager requires this information before discovering, pairing, connecting or disconnecting can
occur.
Note:
The MX9 Bluetooth address identifier label should be protected from damage (rips, tears, spills, soiling, erasure, etc.)
at all times. It may be required when pairing, connecting, and disconnecting new Bluetooth bar code readers.
for details.
4-89
Advertisement
Table of Contents
