Table of Contents
Advertisement
9999 code length that must match for Code 93, 9999 = all lengths
43
start character match for Code 93, 43h = "C"
FF
termination string for third code
To program the previous example using specific lengths, you would have to
count any programmed prefixes, suffixes, or formatted characters as part of the
length. If you use the example on
specific code lengths, you would use the following command line:
SEQBLK62001241FF6A001342FF69001243FF
The breakdown of the command line is shown below:
SEQBLK sequence editor start command
62
code identifier for Code 39
0012
A - Code 39 sample length (11) plus CR suffix (1) = 12
41
start character match for Code 39, 41h = "A"
FF
termination string for first code
6A
code identifier for Code 128
0013
B - Code 128 sample length (12) plus CR suffix (1) = 13
42
start character match for Code 128, 42h = "B"
FF
termination string for second code
69
code identifier for Code 93
0012
C - Code 93 sample length (11) plus CR suffix (1) = 12
43
start character match for Code 93, 43h = "C"
FF
termination string for third code
Output Sequence Editor
Enter Sequence
Require Output Sequence
When an output sequence is Required , all output data must conform to an edited
sequence or the imager will not transmit the output data to the host device.
When it's On/Not Required , the imager will attempt to get the output data to
conform to an edited sequence, but if it cannot, the imager transmits all output
data to the host device as is.
page
4-20, but assume a <CR> suffix and
Default Sequence
4 - 21
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Table of Contents
