Ired Connection To An Existing Network Using Static Ip Addresses; Ired Connection To An Existing Network Using Automatic Ip Addresses; Troubleshooting - QSC TouchMix-8 User Manual
Hide thumbs
Also See for TouchMix-8:
- User manual (71 pages) ,
- Technical notes (2 pages) ,
- User manual (146 pages)
Table of Contents
Advertisement
ired Connection to an Existing Network Using Static IP Addresses
Install a USB-to-Ethernet adapter into one of the mixer's USB ports. Using an RJ45 cable, connect the adapter to a port on the router. The TouchMix
firmware is optimized for adapters using the ASIX AX88772 chip-set. Visit qsc.com for a list of validated adaptors.
To Connect to an existing wired network:
Edit Settings for:
Wired
If desired, enter a new Mixer Name.
IP Address Assignment
Static
Enter the IP Address
enter IP Address
Enter the Network Mask
enter Network Mask
Enter the Gateway
enter the Gateway
Apply
Touch
When the mixer is connected to the network, a confirmation message displays.
You can now connect your wireless device using the existing network's name (Network SSID) and Password.
ired Connection to an Existing Network Using Automatic IP Addresses
Install a USB-to-Ethernet adapter into one of the mixer's USB ports (visit qsc.com for a list of validated adaptors). Using an RJ45 cable, connect the
adapter to a port of the router.
To Connect to an existing wired network:
Edit Settings for:
Wired
If desired, enter a new Mixer Name.
IP Address Assignment:
Assigned Address:
192.168.1.1
Apply
Touch
When the mixer is connected to the network, a confirmation message displays.
You can now connect your wireless device using the existing network's name (Network SSID) and Password.
Troubleshooting
In the network status box, you may get one or more of the following messages:
For troubleshooting Wi-Fi issues, refer to
TD-000472-00-B
Mixer Setup
Menu
for the network.
for the network.
for the network.
Mixer Setup
Menu
Automatic
(The actual address you get will probably be different than the example.)
"Network Troubleshooting" on page
Network Setup
Network Setup
Adapter Not
Connection Error
Present
61.
11
or
Connected
- Quick Links:
- Touchmix™ How to
- Connecting Remote Devices
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
