Fx Processors - Dense Reverb; Fx Processors - Lush Reverb - QSC TouchMix-8 User Manual
Hide thumbs
Also See for TouchMix-8:
- User manual (71 pages) ,
- Technical notes (2 pages) ,
- User manual (146 pages)
Table of Contents
Advertisement
FX Processors – Dense Reverb
The Dense Reverb (presets with a "D" suffix) is a model of a DSP reverb with more dense reflections that some may find
more representative of actual acoustic spaces.
FX Masters
Home
FX Masters
Refer to
— Figure 73
1. Lo Cut Knob – Attenuates, or "cuts" frequencies below this frequency
setting. Range is to 20 Hz to 2 kHz.
2. Hi Cut Knob – Attenuates, or "cuts" frequencies above this frequency
setting. Range is 200 Hz to 20 kHz.
3. Reverb Time Knob – Reverb Time (RT) is the length of time required for
the reverberation to drop by 60 dB.
4. Initial Delay Knob – Sets the time interval between input signal and
first reflection.
5. High Ratio Knob – Changes the amount of high frequency reflections.
6. Diffusion Knob – Controls the density of groups of Early Reflections. Or
Simulates the complexity of surfaces off which the sound reflects.
7. Reverb Delay Knob – Changes the delay between reflections.
8. Early Reflections Knob – Changes the amplitude of the early reflections.
FX Processors – Lush Reverb
Lush Reverb (presets with an "L" suffix) is a model of a DSP reverb with a more "lush" character.
Home
FX Masters
FX Masters
— Figure 49
Refer to
1. Lo Cut Knob – Attenuates, or "cuts" frequencies below this frequency
setting. Range is 20 Hz to 2 kHz.
2. Hi Cut Knob – Attenuates, or "cuts" frequencies above this frequency
setting. Range is 200 Hz to 20 kHz.
3. Size Knob – The longest dimension of the simulated acoustic space
in meters.
4. Pre Delay Knob – Sets the time interval between input signal and
first reflection
5. Low Reverb Knob – Adjusts the reverb decay time for frequencies below
the crossover frequency.
6. Crossover Knob – Sets the crossover point for the Low Reverb Time and
the High Reverb Time.
7. High Reverb Knob – Adjusts the reverb decay time for frequencies above
the crossover frequency.
8. Diffusion Knob – Adjusts the early reflections to simulate a more complex or less complex reflective acoustic surface.
TD-000472-00-B
Select FX
Select
Channel
Effect
FX 1
E ect
Select FX
Select
Channel
Effect
FX 1
E ect
50
Select
Dense Reverb
Dense Reverb
FX
1
2
3
4
5
— Figure 48 —
Select
Lush Reverb
Lush Reverb
FX
1
2
3
4
5
— Figure 49 —
6
7
8
6
7
8
- Quick Links:
- Touchmix™ How to
- Connecting Remote Devices
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
