free hit counter

Talkback / Noise; Phantom Power - QSC TouchMix-8 User Manual

Hide thumbs Also See for TouchMix-8:
Table of Contents

Advertisement

Talkback / Noise

This screen controls the routing and level of Talkback and Noise.
NOTE!: Talkback is available only on the TouchMix-16, Noise is available on both models.
Touch
Press
Talkback
Menu
Menu
Talkback
TouchMix-16
— Figure 60
Refer to
(TouchMix-8 does not have the Talkback feature.)
1. Assignments – These buttons select the destination for the noise or talkback
signals. Note that it is possible to route talkback to the four FX devices. This is very
useful when auditioning and selecting effects.
2. Talk Level – Adjusts the level of the talkback signal to the assigned outputs. -Inf
(Infinity) is off.
3. Talkback Enable – Touch to enable Talkback, touch again to disable Talkback.
Unlike the mixer's hold-to-talk Talk button, this button is latching. When enabled,
the hold-to-talk button is illuminated. On the iPad, both Talk and Enable are
latching.
4. Noise Level – Adjusts the level of the noise signal to the assigned outputs.
-Inf (Infinity) is off.
5. Noise Enable – Touch to enable Noise, touch again to disable Noise.

Phantom Power

Supplies +48 VDC to XLR Inputs only when using an XLR connector. Phantom power
is not available on any 1/4" TRS connectors.
Press
Touch Mic
Menu
Phantom
Menu
Menu
Mic Phantom
Mic Phantom
— Figure 61
Refer to
1. Input Selection On – Touch the Input channel name button, or the
corresponding XLR icon to turn +48V on or off. Red indicates on.
2. Input Selection Off – Touch the Input channel name button, or the
corresponding XLR icon to turn +48V off. Gray indicates off.
In addition, Phantom power may be switched on and off from the Setup screen of
each input channel.
TD-000472-00-B
Touch
OR
Noise Gen .
/
Noise Gen.
TouchMix-8
Press
OR
+48V
/
/
+ 48V
+ 48V
Phantom
Phantom
1
2
3
4
5
1
2
59
— Figure 60 —
— Figure 61 —

Hide quick links:

Advertisement

Table of Contents
loading