Table of Contents
Advertisement
4. TB200/400 Basic Configurations
4.1 Logging in the Web Configuration Panel
TB200/400 provides web-based configuration interface for administrator. The user
can manage the device by logging in the web interface. Check the factory defaults
below:
IP address:
http://192.168.5.150
User Name:
admin
Default Password:
password
1. Start the browser on PC. In the address bar, enter the IP address, click "Enter"
button and then you can see the Web Configuration Panel login page (see Figure
4-1).
2. Enter the Admin User Name and Password to log in.
Figure 4-1 TB200/400 Web Configuration Panel Login Page
Via the configuration interface, the admin can make all the system configurations,
including network settings (LAN, WAN, Firewall, VPN, DDNS, VLAN, etc.); system
parameters configuration (time zone, password, etc.); internal settings (Web access
port, etc.); BRI ports list; VoIP Trunks; Trunk Groups; Hotline; call logs (search,
download); firmware update and reset, etc.
After saving the changes, remember to click the "Apply changes" button to make
the changes take effect.
TB200/400 Installation Guide
9/11
Advertisement
Table of Contents
