Programming The Water Softener - Miele Novotronic G 851 SC Plus Operating Instructions Manual
Hide thumbs
Also See for Novotronic G 851 SC Plus:
- Operating instructions manual (53 pages) ,
- Operating instructions manual (52 pages) ,
- Operating instructions manual (52 pages)
Table of Contents
Advertisement
Before using for the first time
Programming the water softener
Your water hardness level must be pro-
grammed into the dishwasher using the
program selector and buttons on the
control panel.
^ Make sure the dishwasher is turned
off.
^ Turn the program selector to "Stop".
^ Press and hold the "Top Solo" button
and at the same time turn on the
dishwasher with the "On/Off" button.
Release the "Top Solo" button within
two seconds.
The "Salt" indicator will flash.
If the "Rinse aid" indicator comes on,
the rinse aid dispenser needs to be
filled.
If any other indicator is lit or flashing,
the above steps must be repeated.
14
^ Turn the program selector to the posi-
tion which corresponds to the water
hardness in your area (see table).
gr/gal*
ppm
1 - 4**
20 -
5 - 7
90 - 130
8 - 10
140 - 180
11 - 13
200 - 230
14 - 16
250 - 290
17 - 22
310 - 400
23 - 35
410 - 630
36 - 70
650 - 1260
* US gallons
** factory preset
Example:
Water hardness is 20 gr/gal.
Turn the program selector to the
"6 o'clock" position.
Selector setting
70
Normal Plus
Normal
China & Crystal
Rinse & Hold
5 o'clock position
6 o'clock position
7 o'clock position
Energy Saver
Hide quick links:
Advertisement
Table of Contents
