Table of Contents
Advertisement
Available languages
Available languages
Avanti Bagel 4T 2002.qxd
4
5
6
09/10/2002
15:50
Making toasts - Fig. 4
• To load the toaster, press down the carriage
control lever(s) until they lock in position, toasting
begins. The metal grills will automatically
adjust to the thickness of the slices.
• On electronic models, the carriage control
levers can only be locked when the appliance is
plugged in.
Stopping the toasting process
• Once toasted, the carriage control levers are
automatically unblocked, the slices of bread
come up and the toaster stops working.
During toasting process
• The toaster has two «STOP» s functions so that
you can interrupt the toasting process at any time
by pressing the «STOP» s button(s). The bread
will automatically pop up. (For example, if you
realize that the settings are not properly adjusted
or if you think the bread is sufficiently toasted).
• If the bread jams in the slots and the elements
do not switch off, remove the plug from the wall
outlet and wait for the appliance to cool down.
Specific functions
Reheat (in the two left slots only) - Fig. 5
• To reheat bread already toasted, use the left side
of your toaster.
• To reheat toast lower the bread into the toaster
and press the «reheat» button (D).
Bagel - Fig. 6
• To toast your bagel, use
the left side of your toaster
• Select the browning level desired on the dial from
1 to 6. Place your bagel cut in two parts in your
toaster, the soft part towards the centre (Fig. 6) .
Press down the loading command and switch on
the bagel touch. Only the central heating
elements of the left side of your toaster
are working on.
• Your bagel will be toasted according the position
choised on the cut face and will be crispy on it
external side.
8
Page 8
• After extended use, crumbs or dust may block the
locking system. To correct this, simply press down
the carriage control levers several times
successively to lock them and please refer to the
section on maintenance and cleaning tips.
Then carefully remove the bread from the
toaster slots, taking care not to touch the
heating elements.
• When toasting raisin bread, remove any loose
raisins from the bread before placing them in the
toaster. Loose raisins may fall into the appliance
and damage the toaster.
• Do not touch the metal area around the slots as
this may be hot.
• The toaster will heat up independently from the
setting of the browning control (1 and 6).
• At the end of the cycle, the bread will pop up
automatically and the toaster switches off.
• At the end of the cycle, the bagel will pop up
.
automatically and the toaster switches off.
• If your bagel is too heavy, pull up the loading
command to bring it out.
• Do not use the Hi-Lift button during toasting.
Hide quick links:
Advertisement
Table of Contents
