Start Of Bitmap Registration To Flash Rom; End Of Bitmap Registration To Flash Rom; Print Mode Setting - Toshiba TRST-A10 User Manual
Pos printer opos control
Hide thumbs
Also See for TRST-A10:
- Maintenance manual (42 pages) ,
- Owner's manual (32 pages) ,
- Product description (29 pages)
Table of Contents
Advertisement
TRST-A10/TRST-A15 POS Printer OPOS Control Application User's Manual
5) Start of Bitmap Registration to Flash ROM
Function
Requests to start Bitmap Registration to Flash ROM of the printer device.
This clears all bitmap data stored in the flash ROM. By using this method and SetBitmap
method, bitmaps of Bitmap No. 4 to 10 can be registered, which can be retained even after
the printer power is turned off.
Format
Parameter
Command
pData
pString
6) End of Bitmap Registration to Flash ROM
Function
Requests to end Bitmap Registration to Flash ROM of the printer device.
After this method is completed, bitmaps of Bitmap No. 4 to 10 cannot be registered.
Format
Parameter
Command
pData
pString
7) Print Mode Setting
Function
Sets a print mode. This function dynamically changes the print mode that can be set by
the means such as print mode registry setting and printer device configuration setting.
Format
Parameter
Command
pData
Description
TPTR_CMD_SETBITMAP_FLASH_START
Not used (Set "0" (zero).)
Not used (Set null ("").)
Description
TPTR_CMD_SETBITMAP_FLASH_END
Not used (Set "0" (zero).)
Not used (Set null ("").)
Description
TPTR_2STCMD_SET_PRINTINGMODE
Sets a print mode to be used.
0: Single Side Print Mode
This mode only prints on a front side of paper.
Default setting
1: Transaction1
This mode automatically performs printing on both of
the front and back sides of paper. In this mode, the
print method does not immediately starts printing.
Based on a Paper Cut command or a change in print
mode, print lines processed by the print method are
automatically divided approximately in half and former
and latter half of data is printed on the front and back
side of paper respectively.
2: Transaction2
This mode performs printing on the front/back side
specified by the print method or by the Print Side
Setting
function
In this mode, the print method does not immediately
starts printing. Based on a Paper Cut command or a
change in print mode, print lines processed by the print
method are batch processed.
TOSHIBA TEC CORPORATION EAA-02450
of
the
DirectIO
method.
28
Hide quick links:
Advertisement
Table of Contents
