Installing The Battery - Cisco CallManager 7920 Phone Manual

Wireless ip phone for cisco callmanager

Hide thumbs Also See for CallManager 7920:

Table of Contents

Installing the Battery

You must install and charge the battery before you

can use the Cisco Wireless IP Phone 7920. To install

or remove the battery, follow these steps.

1. To install the battery, insert the battery catches

(as shown in Figure 1-1) in the corresponding

slots at the bottom of the Cisco Wireless

IP Phone 7920. Make sure that the metal

contacts on the battery and the phone are facing

each other.

2. Press the battery to the body of the phone until it

locks into place.

3. To remove the battery, press down on the locking

catch, then lift and remove the battery.

78-14564-03

Table of Contents