Table of Contents
Advertisement
4.4 Display Assembly
Installing the Display Assembly
Install the display assembly according to the following procedures and Figures 4-8, 4-9.
1. Place the display panel in the correct position and push the wireless antenna cable,
Speakers cable and LCD/FL cable into the bottom cover.
2. Connect the LCD/FL cable to CN3 on the system board.
3. Connect the Speakers cable to CN7 on the system board.
4. Secure the display assembly with two M2.5x 10 black flat-head screws.
Close the display panel and turn the computer so that the back is facing you and secure
two M2.5x 10 black flat-head screws.
TOSHIBA NB100 Maintenance Manual
4 Replacement Procedures
4-21
Hide quick links:
Advertisement
Chapters
Table of Contents
