Related Manuals for U-Reach MD801
Summary of Contents for U-Reach MD801
- Page 1 MD Series Duplicator User Guide V3.10 www.ureach-inc.com the Expert of Duplicators...
-
Page 2: Table Of Contents
Content Index I. Introduction 7. Utility 1. Features 7-1. Information 2. System Overview 7-2. Erase Disc 2-1. Package Content 7-3. PreScan Source 2-2. MD Series Duplicator 7-4. Track Edit 2-3. Display Interface 7-5. Eject All Disc 2-4. Installation of MD Series Controller 4 7-6. -
Page 3: Introduction
I. Introduction 1. Features ● Multi-Session, MultiDisc, Disc Spanning, Disc to Disc duplication. ● Independent 11, 8, 4 SATA port, can really achieve high speed 1-10, 1-7, 1-3 DVD/Blu-ray Duplication. ● High speed DDR2 SDRAM. ● Support various Flash media interface, ex: USB, SD, CF, MicroSD…. ●... -
Page 4: Display Interface
I. Introduction MD801 MD803 MD807 MD810 2-3. Display Interface Display LCD Backward Confirm/Execute Escape/Cancel Forward MS/MS Pro SD/MMC 2-4. Installation of MD Series Controller BD2804... - Page 5 I. Introduction BD2808 ** Each SATA port is independent (without Master and Slave port). ** If HDD is available, HDD should connect to port No.1, if no HDD installed, Reader should connect to port No.1, and other drives should connect to the rest ports in order.
-
Page 6: Main Function Structure
I. Introduction 2-5. Main Function Structure There are two main functions of MD series, one is Disc (CD/DVD/Blu-ray) Duplication, and another one is Flash (USB/SD/microSD/MMS..) to Disc Duplication. Disc to Disc Duplication Flash (USB/SD/CF/MMS...)to Disc Duplicator ** Please refer to Chapter 2 for operation guide 1. - Page 7 I. Introduction ● Disc Spanning: A big capacity memory card with large data can copy to several discs. Disc 1/4 Disc 2/4 4GB data Disc 3/4 Disc 4/4 Note: Disc Spanning does not support copy the Flash device with only ONE single big file.
-
Page 8: Reminding
I. Introduction Example of Multi-Session, MultiDisc and Disc Spanning Flash Source Multi-Session MultiDisc Disc Spanning Note Yes, as many USB with 100MB First session blank discs data copy to a CD of CD1 Flash device as you can with small data can make multi- SD card with Yes, as many... -
Page 9: Function Table-Multimedia Duplication
II. Function (MulitMedia Duplicator) Function Table-Multimedia Duplication When you select Disc duplicate, you will enter the Multimedia Dupe disc to disc menu; if you choose Multimedia Dupe, you will only access the Flash to disc menu. Function Sub-function Description 1. Copy To copy Flash to disc To compare Flash source and copied discs 2. -
Page 10: Chapter 1.Multimedia Duplication
II. Function (MulitMedia Duplicator) Chapter 1. MultiMedia Duplication Select Multimedia Dupe from the main menu and press to start Flash to disc copy operation. 1. Copy The copy function in Multimedia duplication part has three main options: Multi-Session, Disc Spanning and MultiDisc. Each mode can be enable or disable in Setup function. - Page 11 II. Function (MulitMedia Duplicator) 4. When the copy task has finished, the system will close the session. 5. The disc will be ejected, and you can continue to copy another memory card or USB, or you can keep it for next copy task. **Note: 1 As long as the disc was a multi-session disc, it will not support disc spanning copy.
-
Page 12: Compare
II. Function (MulitMedia Duplicator) 3. The system will detect the source and calculate how many discs will need. 4. After detecting, the system will start to copy. Disc 1 Total discs needed The data size for disc 1 Copied data size 5. - Page 13 II. Function (MulitMedia Duplicator) 3. The system will detect the source and the target disc automatically. 4. After detecting, the system will start to compare. The file compared Total file wait for compare Compare process % 5. When the comparison has finished, press to go back to the previous menu.
-
Page 14: Copy + Compare
II. Function (MulitMedia Duplicator) 5. When the comparison has finished, press to go back to the previous menu. 3. Copy + Compare This function is to make a copy first and then compare the copied discs with source immediately once the copy task has finished. 4. -
Page 15: Disc Information
II. Function (MulitMedia Duplicator) 5. After detecting, the information of the device will show up. The information includes used space, total capacity and file quantity. Content size Total capacity File Q'ty 4-2. Disc Information 1. Place a disc into a drive. 2. -
Page 16: Utility
II. Function (MulitMedia Duplicator) 1. Select 4.Information and press 2. Select 3.System Info. and press to check the system’s information. 3. The system information will show on the LCD. 5. Utility This function will update the firmware of this system by using certified update firmware which released by manufacturer. -
Page 17: Setup
II. Function (MulitMedia Duplicator) 5. When updating has finished, the system will ask you to reboot it. 6. Setup This section allows you to setup the multi-session, disc spanning, multidisc, disc burning speed and advanced setup. 6-1. Multi-Session 1. Select 6.Setup and press 2. -
Page 18: Multidisc
II. Function (MulitMedia Duplicator) 2. Select 2.Disc Spanning and press 3. Use to enable or disable the copy function. ** Note: Disc spanning can not execute with Multidisc mode at the same time, when both modes are enable, the system will primary execute disc spanning. -
Page 19: Burn Speed
II. Function (MulitMedia Duplicator) 6-4. Burn Speed In this section, you can adjust CD, DVD and Blu-ray proper burning speed for duplication. 1. Select 6.Setup and press 2. Select 4.Burn Speed and press 3. Select 1.CD Disc and press 4. Use to adjust the proper speed of the disc duplication. - Page 20 II. Function (MulitMedia Duplicator) Time Zone This setting allows you to setup the proper time zone of working place. Language You can set the language you prefer to use during operation. Factory Default You can reset all the setting to manufacturer default setting by this function.
-
Page 21: Function Table-Disc To Disc Duplication
II. Function (Disc Duplicator) Function Table-Disc to Disc Duplication When you select Disc duplicate, you will enter the disc to disc menu; if you Disc Dupe choose Multimedia Dupe, you will only access the Flash to disc menu. Function Sub-function Description To copy disc to disc or copy disc from 1. - Page 22 II. Function (Disc Duplicator) Allow the system to do the Copy, 1. Auto Start Time Test, Compare and Copy + Compare functions automatically 1. Basic 2. Display Mode 2. Show Speed 3. Show Timer 3. Button Beep To eject all trays with disc inside when 1.
- Page 23 II. Function (Disc Duplicator) To select image file from HDD as your 1. Select Image source for copy. To load your source disc to the built-in 2. Disc=> Image HDD. To adjust the speed of source reader 3. Set Reader Speed while you load data from the reader to HDD.
-
Page 24: Chapter 2. Disc Duplication
II. Function (Disc Duplicator) Chapter 2. Disc Duplication Select Disc Dupe from the main menu and press to start disc to disc copy operation. 1. Copy It is important to make sure that your source disc is placed in the right drive. You can check or select your source reader by function 6.Select Source. -
Page 25: Test
II. Function (Disc Duplicator) **Note: Due to default setting of auto start time, the duplicator will start to copy automatically within a few seconds. You can set “OFF” to close the auto start function or set a longer waiting time. The default setting is 5 seconds. -
Page 26: Compare
II. Function (Disc Duplicator) **Note: 1 This function is unable to support DVD+R blank disc. 2 If you use CD/DVD rewritable discs as your blank media in the simulation, all the content inside the discs will be erased permanently during test simulation. 3. -
Page 27: Set Burn Speed
II. Function (Disc Duplicator) **Note: In Copy, Test, Compare and Copy+Compare functions 1 If there is no source and target discs inside the duplicator, there will be nothing show on LCD. 2 If the built-in HDD is selected as source, the information presents different: Image file name 3 The information display of these 4 functions will be different... -
Page 28: Select Source
II. Function (Disc Duplicator) 6. Select Source You can set any drive or built-in HDD in the duplicator to be your source reader. 1. Using to select 6.Select Source 2. Press to check the current source reader, or select the proper drive to be the source reader by pressing , once the source reader is selected, press... -
Page 29: Erase Disc
II. Function (Disc Duplicator) 3. The information will show on the LCD as below: ● Disc Info.: You can check the format of disc, burning speed supported and total capacity. If the disc has data inside, you also can check the size of data. -
Page 30: Prescan Source
II. Function (Disc Duplicator) 3. Using to select 1.Quick Erase. or 2.Full Erase. 4. Pressing to execute the erasing task. When the system is detecting the discs, you will see the colon flashing. The Second Drive 5. When the erase job is in process, you should see the O and o are blinking by turns. -
Page 31: Track Edit
II. Function (Disc Duplicator) 1. Place a source disc into reader. 2. Using to select 7.Utility and press to enter the sub menu. Then, select 3.Prescan Source and press to start scan task. 3. When prescan task is in process, you can see the process on the display: Data size Elapsed time Scanned data size... -
Page 32: Copy Counter
II. Function (Disc Duplicator) 7-6. Copy Counter This function will record the result of duplication. ● Show Count: You can check how many discs copy successful and failed. ● Enable Counter: You can set the counter enable or disable to record the copy result. -
Page 33: Print Ls Label
II. Function (Disc Duplicator) 3. The system will detect the update file and execute update task automatically. 4. Once the update job has done, the system will require you to reboot the system. **Note: DO NOT save the firmware in a folder. The system can not detect the firmware if you save it in a folder. -
Page 34: Display Mode
II. Function (Disc Duplicator) 2. Pressing to set the time. 8-2. Display Mode You can select the prefered display mode in Copy, Test, Compare, Copy+Compare. ● Basic: It will only show the copy process (%) on LCD. Q'ty of target Data size Copy process % Copied size... -
Page 35: Reader Speed
II. Function (Disc Duplicator) ● Eject Target Only: Only eject target trays with disc inside once the system is booted up. ● Eject Source Only: Only eject source disc once the system is booted up. ● Eject All Trays: To eject all trays once the system is booted up. 8-5. - Page 36 II. Function (Disc Duplicator) **Note: Skip Read Error can not fix the error in the source disc, all it does is skipping the errors and keeps copying the rest of readable data. ● Change Bad Master: This setting will make the system eject source disc and ask for another one while the source disc is unreadable by the system.
-
Page 37: Hdd Manager (For Hdd-Installed Duplicator)
II. Function (Disc Duplicator) 9. HDD Manager (For HDD-installed duplicator) 9-1. Select Image You can select image file from HDD as your source for copy. When this function is selected, the system will set the HDD to be the source reader automatically. -
Page 38: Set Reader Speed
II. Function (Disc Duplicator) 4. When loading has finished, the disc will be ejected automatically. **Note: The source disc can be placed in any drive, it will not affect the loading process. 9-3. Set Reader Speed You can adjust the reading speed of the drive which you put the source disc. This function is ONLY available when you loading the source disc to HDD. -
Page 39: Delete Image
II. Function (Disc Duplicator) 1. Pressing to select 9.HDD Manager and sub menu 5.Rename Image. 2. Pressing and select which image file you would like to rename by pressing , and then press to start edit a new name for the selected file. -
Page 40: Format Hdd
II. Function (Disc Duplicator) 9-8. Format HDD This function allows you to format the built-in HDD while the HDD is NOT selected as reading source. You can change the source from HDD to other drive in 6. Select Source. Due to the capacity for discs loading is hard to predict precisely and more and more different discs are coming out. -
Page 41: Specification
III. Specification Model MD801 MD803 MD807 MD810 Controller BD2802 BD2804 BD2808 BD2811 Operation Standalone Target 1:10 Flash to Disc Duplication Function Disc to Disc Duplication Buffer (DDR2) 128MB CD Speed DVD Speed Blu-ray Speed Multi-session Memory card or USB Backup... -
Page 42: Faq
IV. FAQ Q1: Will MD800 transform my memory card data to DVD video or MP3 CD? MD800 will back up what ever you have in your original media devices; MD800 won’t transform your data’s format. You can trust their simple and straightforward copy capability. -
Page 43: Appendix
Appendix Lightscribe Operation Step 1 Install Lightscribe template software to PC Download LightScribe software from www.lightscribe.com and install below software. A. LIGHTSCRIBE SYSTEM SOFTWARE (LSS) B. LIGHTSCRIBE TEMPLATE LABELER. - Page 44 Appendix Step 2 Execute "LightScribe Drive select.exe".exe file to select LightScribe Drives 1. Receive a .exe file from your supplier. 2. Execute the .exe file on your PC. 3. And select the LightScribe Duplicator drive on the list. **Note: When everytime the Duplicator change LightScribe drive, must re- select drive before create LightScribe image for that Duplicator.
- Page 45 Appendix ❸ Select the new drive and press , the drive will be added to the list. Step 3 Design Lightscribe Template and Lightscribe printing on PC. 1. Click to launch the LightScribe Template on our PC. 2. Follow procedure to create your label image. 3.
- Page 46 Appendix 4. Click the Print to save the lightscrbe image .LSI file to a USB stick or a Disc. ❸ ❹ 5. Plug the USB drive or Disc into Duplicator. 6. Select the utility function 7-8.PRINT LS Label. The system will read the image into the duplicator and start printing the lightscribe label.