Show Igmpsnooping - D-Link DWL-8500AP Command Reference Manual
Dws-3000 series/ unified wired & wireless access system
Hide thumbs
Also See for DWL-8500AP:
- Administrator's manual (168 pages) ,
- User manual (270 pages) ,
- Configuration manual (61 pages)
Table of Contents
Advertisement
Default
Format
Mode
no set igmp mrouter interface
This command disables the status of the interface as a statically configured multicast router
interface.
Format
Mode
show igmpsnooping
This command displays IGMP Snooping information. Configured information is displayed
whether or not IGMP Snooping is enabled.
Format
Mode
When the optional arguments
the following information:
Admin Mode Indicates whether or not IGMP Snooping is active on the switch.
Multicast Control Frame Count The number of multicast control frames that are processed
Interface Enabled for IGMP Snooping The list of interfaces on which IGMP Snooping is
VLANS Enabled for IGMP Snooping The list of VLANS on which IGMP Snooping is
When you specify the
IGMP Snooping Admin Mode Indicates whether IGMP Snooping is active on the interface.
Fast Leave Mode Indicates whether IGMP Snooping Fast-leave is active on the interface.
Group Membership Interval The amount of time in seconds that a switch will wait for a
Maximum Response Time The amount of time the switch waits after it sends a query on an
Multicast Router Expiry Time The amount of time to wait before removing an interface
When you specify a value for
VLAN ID
IGMP Snooping Admin Mode Indicates whether IGMP Snooping is active on the VLAN.
disabled
set igmp mrouter interface
Interface Config
no set igmp mrouter interface
Interface Config
show igmpsnooping [<slot/port> | <vlan_id>]
Privileged EXEC
<slot/port>
by the CPU.
enabled.
enabled.
> values, the following information appears:
<slot/port
report from a particular group on a particular interface before deleting the
interface from the entry.This value may be configured.
interface because it did not receive a report for a particular group on that inter-
face. This value may be configured.
from the list of interfaces with multicast routers attached. The interface is
removed if a query is not received. This value may be configured.
<vlan_id>
The VLAN ID.
or
are not used, the command displays
<vlan_id>
, the following information appears:
IGMP Snooping Configuration Commands
2 Switching Commands
101
Hide quick links:
Advertisement
Table of Contents
