free hit counter
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Switch
  5. DWL-8500AP
  6. Command reference manual

D-Link DWL-8500AP Command Reference Manual page 262

Dws-3000 series/ unified wired & wireless access system
Hide thumbs Also See for DWL-8500AP:
Table of Contents

Advertisement

CLI Command Reference
Total Ignored Frames The total number of dropped packets including those that were
Total Deferred Frames The total number of frames that could not be transmitted after multi-
Received Packets Not Forwarded
Packets Transmitted Octets
262
© 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
aborted.
ple attempts because they encountered collisions.
Total - A count of valid frames received which were discarded (in other
words, filtered) by the forwarding process.
Local Traffic Frames - The total number of frames dropped in the forward-
ing process because the destination address was located off of this port.
802.3x Pause Frames Received - A count of MAC Control frames received
on this interface with an opcode indicating the PAUSE operation. This counter
does not increment when the interface is operating in half-duplex mode.
Unacceptable Frame Type - The number of frames discarded from this port
due to being an unacceptable frame type.
Multicast Tree Viable Discards - The number of frames discarded when a
lookup in the multicast tree for a VLAN occurs while that tree is being modi-
fied.
Reserved Address Discards - The number of frames discarded that are des-
tined to an IEEE 802.1 reserved address and are not supported by the system.
Broadcast Storm Recovery - The number of frames discarded that are des-
tined for FF:FF:FF:FF:FF:FF when Broadcast Storm Recovery is enabled.
CFI Discards - The number of frames discarded that have CFI bit set and the
addresses in RIF are in non-canonical format.
Upstream Threshold - The number of frames discarded due to lack of cell
descriptors available for that packet's priority level.
Total Bytes - The total number of octets of data (including those in bad pack-
ets) received on the network (excluding framing bits but including FCS
octets). This object can be used as a reasonable estimate of Ethernet utiliza-
tion. If greater precision is desired, the etherStatsPkts and etherStatsOctets
objects should be sampled before and after a common interval. -----
Packets Transmitted 64 Octets - The total number of packets (including bad
packets) received that were 64 octets in length (excluding framing bits but
including FCS octets).
Packets Transmitted 65-127 Octets - The total number of packets (including
bad packets) received that were between 65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets).
Packets Transmitted 128-255 Octets - The total number of packets (includ-
ing bad packets) received that were between 128 and 255 octets in length
inclusive (excluding framing bits but including FCS octets).
Packets Transmitted 256-511 Octets - The total number of packets (includ-
ing bad packets) received that were between 256 and 511 octets in length
inclusive (excluding framing bits but including FCS octets).

Advertisement

Table of Contents
loading

Related Manuals for D-Link DWL-8500AP

Related Products for D-Link DWL-8500AP

This manual is also suitable for:

Dwl-3500ap

Table of Contents