Show Spanning-Tree Brief; Show Spanning-Tree Interface - D-Link DWL-8500AP Command Reference Manual
Dws-3000 series/ unified wired & wireless access system
Hide thumbs
Also See for DWL-8500AP:
- Administrator's manual (168 pages) ,
- User manual (270 pages) ,
- Configuration manual (61 pages)
Table of Contents
Advertisement
CST Regional Root Bridge Identifier of the CST Regional Root. It is made up using the
Regional Root Path Cost Path Cost to the CST Regional Root.
Associated FIDs List of forwarding database identifiers currently associated with this
Associated VLANs List of VLAN IDs currently associated with this instance.
show spanning-tree brief
This command displays spanning tree settings for the bridge. The following information
appears.
Format
Modes
Bridge Priority Configured value.
Bridge Identifier The bridge identifier for the selected MST instance. It is made up using the
Bridge Max Age Configured value.
Bridge Max Hops Bridge max-hops count for the device.
Bridge Hello Time Configured value.
Bridge Forward Delay Configured value.
Bridge Hold Time Minimum time between transmission of Configuration Bridge Protocol
show spanning-tree interface
This command displays the settings and parameters for a specific switch port within the
common and internal spanning tree. The
following details are displayed on execution of the command.
Format
Modes
Hello Time
Port mode
Port Up Time Since Counters Last Cleared Time since port was reset, displayed in days,
STP BPDUs Transmitted Spanning Tree Protocol Bridge Protocol Data Units sent
STP BPDUs Received Spanning Tree Protocol Bridge Protocol Data Units received.
RST BPDUs Transmitted Rapid Spanning Tree Protocol Bridge Protocol Data Units sent
RST BPDUs Received Rapid Spanning Tree Protocol Bridge Protocol Data Units received.
bridge priority and the base MAC address of the bridge.
instance.
show spanning-tree brief
Privileged EXEC
User EXEC
bridge priority and the base MAC address of the bridge.
Data Units (BPDUs)
show spanning-tree interface <slot/port>
Privileged EXEC
User EXEC
Admin hello time for this port.
Enabled or disabled.
hours, minutes, and seconds.
> is the desired switch port. The
<slot/port
Spanning Tree Protocol (STP) Commands
2 Switching Commands
49
Hide quick links:
Advertisement
Table of Contents
