Table of Contents
Advertisement
ADSL Gateway with 4-Port Switch
Windows 2000 or XP Instructions
1. Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button.
Note: The MAC address is also called the Physical Address.
2. At the command prompt, enter ipconfig /all. Then press the Enter key.
3. Write down the Physical Address as shown on your computer screen; it is the MAC address for your Ethernet
Adapter. This appears as a series of numbers and letters.
The MAC address/Physical Address is what you will use for MAC filtering. The example shows the Ethernet
Adapters's MAC address as 00-00-00-00-00-00. Your computer will show something different.
The example shows the Ethernet Adapter's IP address as 192.168.1.100. Your computer may show something
different.
Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter
Windows 2000 or XP Instructions
Figure C-3: MAC Address/Physical Address
63
Advertisement
Table of Contents
