Setting The Equaliser; Eq7 - Sony MEX-1HD Operating Instructions Manual
Hide thumbs
Also See for MEX-1HD:
- Operating instructions manual (156 pages) ,
- Service manual (124 pages) ,
- Supplementary manual (5 pages)
Table of Contents
Advertisement
Setting the equaliser
— EQ7
You can select an equaliser curve for 7 music
types (Xplod, Vocal, Club, Jazz, NewAge, Rock,
and Custom).
You can store a different equaliser setting for
each source.*
* The same equaliser setting is shared between MW/
LW stations.
Selecting the equaliser curve
SOURCE
L dial
1
Press (SOURCE) to select a source.
2
Press the L dial.
The sound list display appears.
3
Rotate the L dial to select "EQ7," then
press the L dial.
4
Rotate the L dial to select the desired
equaliser curve.
As you rotate the L dial, the equaliser curve
type changes as follows:
Off y Xplod y Vocal y Club y
Jazz y NewAge y Rock y Custom
y Off
5
Press the L dial.
The normal display appears.
To cancel the equalising effect
Select "Off" in step 4.
Note
When DSO is set to "On," equaliser settings are
automatically adjusted for best overall effect.
52
F2
F3
Adjusting the equaliser curve
You can adjust and store the equaliser settings for
frequency and level.
1
Press (SOURCE) to select a source.
2
Press the L dial, then rotate the L dial
to select "EQ7."
3
Press the L dial.
4
Rotate the L dial to select the desired
equaliser curve, then press (F2)
(TUNE).
5
Press the L dial repeatedly to select
the desired frequency.
Each time you press the L dial, the frequency
changes as follows:
t
t
62Hz
157Hz
t
2.5kHz
6.3kHz
6
Rotate the L dial to adjust the level.
The level is adjustable between
–10 to +10 steps.
7
Press (F3) (
).
The normal display appears.
To restore the default setting
Press (F2) (INIT) in step 5.
t
t
396Hz
1.0kHz
t
t
16kHz
62Hz
Advertisement
Table of Contents
