Rear Panel - Sony F65 Operation Manual
Digital motion picture camera/ f65 upgrade kit
Hide thumbs
Also See for F65:
- Operation manual (121 pages) ,
- Operation manual (28 pages) ,
- Operation manual (102 pages)
Table of Contents
Advertisement
Rear panel
a Recorder connector
Connects signal and power with the SR-R4 docked on the
camera.
Note
Attach the connector cap on the optical connector when
not connected to an SR-R4 to protect the connector.
b REC (record) indicator
The indicator is lit red while the recorder is recording.
You can slide the cover to hide the indicator.
c GENLOCK IN (external sync signal input)
connector (BNC type)
Connects to an external sync signal (HD 3-level sync) or
HD-SDI signal for camera synchronization.
The sync signal is selected in the VF menu.
d SHUTTER (external shutter) connector
It is not used in this version.
e HD-Y OUT connector
Outputs the Y-signal for the HD analog component signal.
Used to synchronize external analog equipment.
f SDI OUT1 (SDI output 1) connector (BNC type)
Outputs the SDI1 Look (single link) signal.
g REMOTE connector (8-pin)
Controls the main line signal with the connection of the
optional RM-B170 remote control unit or similar unit
(custom mode).
h DC IN (DC power input) indicator
A 10.5 V to 17 V indicator and 20 V to 30 V indicator are
provided. When the CAM POWER switch is turned ON,
the corresponding indicator lights up according to the
voltage of the power source.
16
Locations and Functions of Parts
a Recorder connector
b REC indicator
c GENLOCK IN connector
d SHUTTER connector
e HD-Y OUT connector
f SDI OUT1 connector
g REMOTE connector
h DC IN indicator
i DC IN connector
j Cable clamp screw holes
i DC IN connector (LEMO 8-pin)
Connects to a power cable with the supplied power cable
connector.
For details, see "2-7 Preparing the Power Supply" (page
23).
j Cable clamp screw holes
Can be used to attach the supplied cable clamp.
There are also screw holes on the upper surface on the left
panel side.
Advertisement
Table of Contents
