Mac Address Assignment - Motorola AP-7131N-FGR Product Reference Manual

Table of Contents

AP-7131N-FGR Access Point Product Reference Guide

• Secure Java-Based WEB UI - (use Sun Microsystems' JRE 1.5 or higher available from Sun's

Web site and be sure to disable Microsoft's Java Virtual Machine if installed)

• Command Line Interface (CLI) via Serial, Telnet and SSH

• Config file - Human-readable; Importable/Exportable via SFTP

MIB (Management Information Base) accessing the access point SNMP function using a MIB

Browser. The access point's download site contains the following MIB files supporting the access

• Symbol-CC-WS2000-MIB-2.0 (standard MIB file)

• Symbol-AP_MIB

Make configuration changes to access point's individually. Optionally, use the access point

import/export configuration function to download settings to other access points.

For detailed information, see

1.3.8 MAC Address Assignment

MAC address assignments are as follows:

• LAN (GE1) - The access point MAC address can be found underneath the access point

• WAN (GE2) - WAN MAC address + 1.

• LAN2 - A virtual LAN not mapped to the LAN Ethernet port. This address is the lowest of the

two radio MAC addresses.

• Radio1 (802.11b/g/n) - Random address located on the Web UI, CLI and SNMP interfaces.

• Radio2 (802.11a/n) - Random address located on the Web UI, CLI and SNMP interfaces.

The access point's BSS (virtual AP) MAC addresses are calculated as follows:

• BSS1 - The same as the corresponding base radio's MAC address.

• BSS2 - Base radio MAC address +1

• BSS3 - Base radio MAC address +2

• BSS4 - Base radio MAC address +3

Importing/Exporting Configurations on page