Dhcp Priorities - Motorola AP-7131N-FGR Product Reference Manual

Table of Contents

By default, auto update is enabled on the access point (since the LAN Port is a DHCP Client,

out-of-the-box auto update support is on the LAN Port).

4. Restart the access point.

5. While the access point boots up, verify the access point:

• Obtains and applies the expected IP Address from the DHCP Server

• Downloads the firmware and configuration files from the SFTP Server and updates both

as required. Verify the file versions within the

NOTE If the firmware files are the same, the firmware will not get updated. If

NOTE The update process is conducted over the LAN or WAN port depending on

B.1.1.3 DHCP Priorities

The following flowchart indicates the priorities used by the access point when the DHCP server is

configured for multiple options.

the configuration file name matches the last used configuration file on the

access point or if the configuration file versions are the same, the access

point configuration will not get updated.

which Server responds first to the access point's request for an automatic

System Settings

Usage Scenarios