3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 104.
4. Locate the thermal sensor. See "Locating components" on page 31.
5. Disconnect the thermal sensor cable from the thermal sensor connector on the system board. See
"Locating parts on the system board" on page 34.
6. From the inner side of the chassis, pivot the retaining clip
side to release it. Then disengage the thermal-sensor plastic holder from the chassis.
Figure 43. Removing the thermal sensor
7. Pull the entire thermal sensor out of the chassis.
130
ThinkCentre M79 Hardware Maintenance Manual
1
inward and then push the clip to the outer