Installing The Drivers For Windows Millennium - Linksys EZXS55W User Manual

V3 instant etherfast series 10/100 fast ethernet switch

Hide thumbs Also See for EZXS55W:

Table of Contents

Enlarged version

Installing the Drivers for Windows

Millennium

Overview

After physically installing the LAN Card in your computer, follow these

instructions to install the network driver. The installation procedure for the net-

work driver will depend on your current system configuration. If at any time

during the installation you encounter problems, consult the Troubleshooting

section.

Installing the Network Card's Driver

Installing the LAN Card's Drivers

1. If you haven't already, start up your computer.

2. Windows Millennium will automatically detect the presence of the PCI

Ethernet Controller hardware in your computer.

3. Insert the EtherFast

10/100 LAN Card Driver Disk into your floppy drive

while the Add New Hardware Wizard window is visible. Select Specify the

location of the driver (Advanced) option. Click Next.

Instant EtherFast

Series

Fast Ethernet Switched 10/100 Network In a Box

4. Select Search for the best driver for your device (Recommended) and

select Specify a location. Then, type "A:\WINME" in the drop-down box

and click Next.

5. A window will open, notifying you that Windows is searching for the

Linksys LNE100TX Fast Ethernet Adapter driver. When the window notifies

you that it is ready to install the driver, click Next.

5. Windows will begin installing the driver. At this point, the installation may

require files from your Windows Millennium CD-ROM. If prompted, insert

your Windows Millennium CD-ROM into your CD-ROM drive and enter

Table of Contents

Show Quick Links

Table of Contents