Table of Contents
Advertisement
Basic System Connection
Connection Procedure
1
Connect the camera cable to the camera control unit.
Align here.
Insert deeply and tighten the screw.
2
Connect the camera head unit to the camera cable.
Align here.
3
Attach the special mount lens (not supplied) to the
camera head unit by turning slowly.
4
Connect a camera adaptor DC-777/777CE, etc., and a
monitor to the camera control unit.
5
Connect an AC power cord.
56
When connection is completed
Turn on the monitor first and the camera control unit last.
Notes
• When handling the lens, make sure to keep the lens free of
dust and fingerprints.
• Both plugs of the camera cable are same. It does not matter
which plug is connected to the camera head unit.
Attaching the supplied clamp filter
When you use the XC-333/333P in European countries,
attach the supplied clamp filter as shown. The clamp filter as
supplied is closed; to open it, use a screwdriver.
Attach the clamp filter to the camera
cable near the camera control unit.
Advertisement
Chapters
Table of Contents
