6. Place the notched end of the new memory module toward the contact edge side of the memory slot,
and insert the memory module
module downward until it snaps into place
the slot and cannot be moved easily.
Attention: Do not touch the contact edge of the memory module. Otherwise the memory module
might be damaged.
7. Reinstall the base cover assembly and the external battery pack.
8. Turn the computer over again. Connect the ac power adapter and all cables.
Replacing the wireless LAN card
Before you start, print these instructions.
DANGER
During electrical storms, do not perform any replacement and do not connect the telephone cable
to or disconnect it from the telephone outlet on the wall.
DANGER
Electric current from power, telephone, and communication cables is hazardous. To avoid shock
hazard, disconnect the cables before opening the cover of this slot.
Attention: Before you start installing the wireless LAN card, touch a metal table or a grounded metal object.
This action reduces any static electricity from your body. Static electricity could damage the card.
To replace the wireless LAN card, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 73.
2. Close the computer display, and turn the computer over.
3. Remove the external battery pack. See "Replacing the external battery pack" on page 75.
4. Remove the base cover assembly. See "Replacing the base cover assembly" on page 77.
82
User Guide
1
into the slot at an angle of about 20 degrees. Pivot the memory
2
. Ensure that the memory module is firmly installed in