free hit counter
Sony Odyssey7Q+ Setup Manual
Hide thumbs Also See for Odyssey7Q+:

Advertisement

4K Apple ProRes
23.98, 25, 29.97 (Odyssey7Q+)
HD Apple ProRes
1080p23.98,24,25,29.97,50*,60*
720p50/60
SONY α7S
SETUP GUIDE
Updated February 23, 2015 | Firmware Release v5.10.100
ProRes 422 (HQ)
ProRes 422
ProRes 422 (LT)
Odyssey7Q+
Odyssey7Q

Advertisement

Table of Contents
loading

Summary of Contents for Sony Odyssey7Q+

  • Page 1 SONY α7S SETUP GUIDE Odyssey7Q+ Odyssey7Q 4K Apple ProRes 23.98, 25, 29.97 (Odyssey7Q+) HD Apple ProRes 1080p23.98,24,25,29.97,50*,60* 720p50/60 Updated February 23, 2015 | Firmware Release v5.10.100 ProRes 422 (HQ) ProRes 422 ProRes 422 (LT)
  • Page 2 SONY α NOTES ABOUT USING THE ODYSSEY WITH THE A7S The Odyssey7/7Q do not support 1080p59.94 or 4K over HDMI due to a hardware constraint. If Auto HDMI output is used, the camera will output 1080i. (Odyssey7Q+ it will accept 4K or 1080p59.94)
  • Page 3: Camera Settings

    SONY α CAMERA SETTINGS 1. SWITCH CAMERA TO VIDEO MODE ROTATE THE MODE DIAL TO THE POSITION. 2. SET INTERNAL RECORDING MENU » » PAGE 2 » RECORD SETTING » (59.94/50/29.97/25/24) XAVC-S for 30p / AVCHD fo 60i 3. SET CLEAN HDMI OUTPUT MENU »...
  • Page 4 Note: If you use SLOG-2 you will need to configure the LUT control on the Odyssey by tapping LUT on the lower menu and selecting Sony F5/F55 (SLOG-2). This LUT setting matches the SLOG-2 on the A7S.
  • Page 5 ☼ » SETUP » CAMERA » SONY » 4K/UHD PRORES(.MOV) 4K RECORDING (ODYSSEY7Q+) ☼ » SETUP » CAMERA » SONY » UHD HDMI TO HD PRORES(.MOV) 2. MAKE A7S THE RECORD TRIGGER ☼ » SETUP » RECORD TRIGGER » CAMERA 3.
  • Page 6 SONY α 6. CONNECT TO CAMERA AND VERIFY STATUS INPUT CONNECT A7S HDMI OUTPUT TO ODYSSEY HDMI INPUT The status on your Odyssey will display your camera’s output. Example: UHD 23P 4:2:2 PRORES SONY 4K/UHD 3840 x 2160 7. SET HDMI CADENCE Connect HDMI input, and verify the camera internal record rate matches the input indicator on the Odyssey.
  • Page 7: Off-Loading Data

    OFF-LOADING DATA COPYING FILES TO YOUR COMPUTER 1. CONNECT SSD DRIVE TO ADAPTER Connect the Convergent Design 2.5” Premium SSD Media to any off-the-shelf 2.5” SATA adaptor (example: Seagate GoFlex Thunderbolt Adaptor or USB 3.0 Adaptor) 2. CONNECT ADAPTER TO COMPUTER The SSD will mount within 10-20 Seconds.
  • Page 8: Post Production

    Final Cut Pro 7 Autodesk Smoke Apple FCP X, Aperture Black Magic DaVinci Resolve Sony Vegas Cineform Studio The Foundry Nuke WORKING WITH RECORDED FILES There are numerous post systems and NLEs that can read natively the various file formats recorded by the Odyssey.

Table of Contents