Advertisement
Quick Links
QUAD NETWORKED STATION PORT
INTRODUCTION
The VIP-814 Quad Networked Station Port
allows most loop start terminal devices to be
connected to a managed IP-based LAN/WAN.
SPECIFICATIONS
Access Methods
PBX, FXO Port
POTS telephone set
Features
RJ-45 for network connection
4 RJ-11 telephone connections
4 Relays with Form C contacts
Generates Caller ID Signals
Front panel activity LED
Network activity LEDs
2 REN
2.5mm jack for DC
802.3af compliant
Dimensions/Weight
1.75 H x 6.75" W x 9.5" D
(4.45cm H x 17.15cm W x 24.13cm D)
Weight: 1.75 lbs. (0.80 kg)
Nominal Specifications
Input Impedance:
Input Level:
Output Impedance:
Output Level:
Relay Current:
Nominal Power Requirements
Via rear panel barrel connector:
Voltage:
Current:
Via 802.3af PoE Ethernet Switch:
802.3af:
VIP-814
600 Ohms
-10dBm
600 Ohms
- 10dBm nominal
1 AMP @ 24VDC
24VDC
325mA
Class 3
1
Environment
Temperature:
Humidity:
0 to 85% non-precipitating
Packing List
Qty
1
1
VIP Setup CD
1
VSP Document
2
Mounting Brackets
4
Rubber Pads
6
Wood Screws
1
RJ-45 Patch Cable
INSTALLATION
NOTE: The telephone system referred to in
this manual is the customer premise
equipment such as an electronic key system,
a PBX or a dedicated single line telephone
sets. The VIP-814 is not intended for direct
or indirect connection to the public
telephone network. When used with a
customer premise telephone system such as
a key system or PBX system, these units are
interfaced to the system via a fully protected
page port or system central office port,
which is a fully protected interface device.
Also, the host system must be configured to
disallow central office trunk conferencing in
order to prevent indirect connection to the
public network.
ISSUE 4
0 to +40° C
Item
VIP-814
947997
Advertisement
Related Manuals for Valcom VIP-814
Summary of Contents for Valcom VIP-814
-
Page 1: Specifications
Nominal Specifications a PBX or a dedicated single line telephone Input Impedance: 600 Ohms sets. The VIP-814 is not intended for direct Input Level: -10dBm or indirect connection to the public Output Impedance: 600 Ohms telephone network. -
Page 2: Fcc Information
RJ-45 Ethernet connector. Apply power by interference when the equipment is operated plugging the power supply in to the VIP-814 via in a commercial environment. This the barrel connector on the rear of the VIP-814. equipment generates, uses and can radiate... - Page 3 VALCOM LIMITED WARRANTY Valcom, Inc. warrants its products only to the original purchaser, for its own use, to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment. This Limited Warranty obligation shall be limited to the replacement, repair or refund of any such defective device within the warranty period, provided that: 1.