Table of Contents
Advertisement
DSC-U20
[SERVICE POSITION]
Insert the Memory Stick and the Batteries to DSC-U20, and connect the HASP key to USB connector of PC.
The following setup is performed using the application for adjustment (SEUS).
Setting the "Forced STILL/PLAY mode Power ON" mode
1)
Select page: 00, address: 01, and set data: 01.
2)
Select page: 2F, address: 11, and write data: E0.
3)
Select page: 2F, address: 12, and write data: BC.
4)
Select page: 20, address: 00, and set data: 29.
5)
Select page: 20, address: 01, and write data: 29.
At this time, the set is reset and the power is turns off once and
then on again. Accordingly, the message "Receive Packet Error"
is displayed on the SEUS screen, and the SEUS goes in
"disconnect" state, but this is not a trouble. Click
on the SEUS screen to restore the "connected" state.
6)
Select page: 00, address: 01, and set data: 01.
7)
Select page: 2F, address: 21, and write the following data.
02: STILL mode
03: PLAY mode
PC
Cabinet (upper) block assembly
Cabinet (front) block assembly
BT holder assembly
Insert the batteries*.
*: size AAA
Nickel Metal Hydride batteries (x2).
Exiting the "Forced Power ON mode"
1)
2)
3)
4)
5)
[Connect]
USB cable
(1-823-932-11)
TY-15 board
2-8
Select page: 00, address: 01, and set data: 01.
Select page: 2F, address: 21, and write data: 00.
Select page: 2F, address: 12, and write data: 3C.
Select page: 2F, address: 11, and write data: 60.
Select page: 00, address: 01, and set data: 00.
US-4 flexible board
Memory stick connector
PD-174 board
LCD module
Lens block assembly
- Quick Links:
- Disassembly
Hide quick links:
Advertisement
Table of Contents
