Example Of What The System Displays When You Start The Windows Server 2003 Host - IBM TotalStorage DS6000 Attachment Manual
Host systems attachment guide
Hide thumbs
Also See for TotalStorage DS6000:
- Redbook (578 pages) ,
- Redbooks (406 pages) ,
- Introduction and planning manual (119 pages)
Table of Contents
Advertisement
10. Connect one end of the fiber cable from the devices to the J1 connector on the
11. Carefully reinstall and secure the cover.
12. Connect the power cables.
13. Turn on all external fibre-channel devices.
14. Observe the monitor.
Figure 84. Example of what the system displays when you start the Windows Server 2003
host
15. To see the devices, press Alt+Q, and then use the utility program.
Checking the level of the device driver for the Netfinity adapter
card for Windows Server 2003
This section provides instructions to check the version of the device driver that is
installed on your host.
1. Check www.ibm.com/pc/support for the latest versions of the device drivers,
2. Create backup copies of the following driver diskettes that are included with the
3. Read the software installation chapters to determine which device driver you
4. Place the device driver diskette in the diskette drive.
5. Copy the QLVER.EXE file from the diskette into the directory that contains the
6. Change directories to the subdirectory that contains the QLogic drivers.
7. At the command prompt, type: QLVER *.*
Documentation that comes with your Netfinity adapter card
This section lists documentation that comes with your Netfinity adapter card.
202
DS6000 Host Systems Attachment Guide
adapter.
Note: You will not see the BIOS menu because the adapter BIOS is set to
disabled by default. Instead, you should see the information in
Figure 84.
QLogic Corporation
QLA2xxx PCI Fibre Channel ROM BIOS Version X.XX
Copyright (C) QLogic Corporation 1998 All rights reserved.
www.qlogic.com
Press <Alt+Q> for FAST!Util
BIOS for Adapter X is disabled.
ROM BIOS not installed
utilities, and documentation.
adapter card:
a. Netfinity host adapter for NetWare
b. Netfinity host adapter for Windows Server 2003
want to install.
QLogic device drivers.
For example, type: COPY A:\QLVER.EXE C:\QLC\QLVER.EXE
For example, type: CD \QLC
This action invokes the QLogic banner, followed by a list of drivers and version
numbers.
Advertisement
Table of Contents
