Noise/Vibration Information; Intended Use; Technical Data; Mounting And Operation - Bosch ART 37 Original Instructions Manual
Hide thumbs
Also See for ART 37:
- Original instructions manual (34 pages) ,
- Original instructions manual (19 pages)
Table of Contents
Advertisement
Available languages
Available languages
OBJ_BUCH-1565-002.book Page 8 Monday, January 9, 2012 2:51 PM
8 | English
Symbols
The following symbols are important for reading and
understanding the operating instructions. Please take
note of the symbols and their meaning. The correct in-
terpretation of the symbols will help you to use the
garden product in a better and safer manner.
Symbol
Meaning
Wear protective gloves
Do not use flowing water to clean
the machine
Reaction direction
Movement direction
Switching On
Switching Off
Prohibited action
Accessories/Spare Parts
Intended Use
The machine is intended for the cutting of grass and
weeds under bushes, as well as on slopes and edges
that can not be reached with the lawn mower.
Intended use is related to operation within 0 °C and
40 °C ambient temperature.
Technical Data
Line trimmer
Article number
Rated power
W
-1
No-load speed
min
Cutting line feed
Adjustable handle
Cutting line diameter
mm
Cutting diameter
cm
Cutting spool capacity
m
Weight according to
EPTA-Procedure
01/2003
kg
Protection class
Serial number
see type plate on the gar-
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate
of your garden product. The trade names of the indi-
vidual garden products may vary.
F 016 L70 848 | (9.1.12)
Noise/Vibration Information
Measured sound values determined according to
EN 60335.
Typically the A-weighted noise levels of the product
are: Sound pressure level 83 dB(A); sound power level
103 dB(A). Uncertainty K =2.5 dB.
Vibration total values a
tainty K determined according to EN 60335:
2
a
=4.8 m/s
, K=1.5 m/s
h
Mounting and Operation
Do not connect the machine to the mains socket
before it is completely assembled.
The cutting line continues to rotate for a few sec-
onds after the trimmer is switched off. Allow the
motor/cutting line to stop rotating before switch-
ing "on" again.
Do not rapidly switch off and on.
Do not hand bump the line feed as it could be hot.
Remove any grass from spool cover when chang-
ing line or spool.
It is recommended to use a Bosch approved line.
Cutting performance will vary with different line.
Use the original spring when replacing spool.
Action
Delivery Scope
Connecting the Shaft
Mounting the Auxiliary Handle
Mountfing the Cutting Guard
Attaching the Shoulder Strap
Connecting the Extension Lead
Starting
Stopping
Working Advice
Feeding the Line
Replacing the Line Spool
Winding Line on Spool
ART 37
Fitting Spool into Spool Holder
0 600 878 M..
Maintenance, Cleaning and Storage
1000
9000
Selecting accessories
Bump feed
2.0
37
7
4.6
II
/
den product
(triax vector sum) and uncer-
h
2
.
Figure
1
2
3
4
5
6
7
7
8
9
10
11
12
–
13
14
15
Bosch Power Tools
- Quick Links:
- Mounting and Operation
Hide quick links:
Advertisement
Table of Contents
