S1700 Managed Series Ethernet Switches
Web User Manual
Item
Match MAC Address
Match Ethernet Type
802.1p Priority
Time Range Name
Step 3 Configure the needed parameter.
Step 4 Click Apply button to apply all the changes made.
----End
Create a User-defined Rule
Step 1 Click ACL>ACL Profile.
Step 2 Create a user-defined ACL in ACL list.
Step 3 Click the created user-defined ACL entry in ACL list.
Step 4 Then click New button in the ACL Rule list box to add a new rule, opening the configuration
page shown as the figure below.
Figure 6-9 Create aUser-Defined Rule
Issue 05 (2012-10-25)
Description
Source MAC Address: enter the source MAC address and the
source MAC address mask in the corresponding Mask field. Mask
used to set the source MAC address range, mask bit value of 0
corresponding to the MAC address bit is Independent Bit (could be
0 or 1); mask bit value of 1 corresponding to the MAC address bit is
Matching Bit( must exactly match the source MAC address). The
MAC address will match the whole field if no mask entered..
Destination MAC Address: enter the destination MAC address and
the destination MAC address mask in the corresponding Mask
field. Mask used to set the destination MAC address range, mask
bit value of 0 corresponding to the MAC address bit is Independent
Bit (could be 0 or 1); mask bit value of 1 corresponding to the MAC
address bit is Matching Bit( must exactly match the destination
MAC address). The MAC address will match the whole field if no
mask entered.
Select or enter the message type to identify the protocol type used
by link layer. Its range will be hex 0x0600 ~ 0xFFFF and the mask
rang will be 0x0 ~ 0xFFFF.
Specify the 802.1p priority field of data to be matched.
Click Please Select button to specify effective time for the rule.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 ACL Configuration
91