Related Manuals for Dahua DH-IPC-HDW2100P
Summary of Contents for Dahua DH-IPC-HDW2100P
- Page 1 HD IR Waterproof Network Dome Camera User’s Manual Version 4.1.0 Zhejiang Dahua Technology CO., LTD...
- Page 2 Welcome Thank you for purchasing our Network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference!
- Page 3 Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction) Please note: Do not connect two power supplying sources to the device at the same time;...
- Page 4 Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens surface. Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean the device.
-
Page 5: Table Of Contents
Table of Contents General Introduction ......................1 Overview ........................1 Features ........................1 Specifications ......................2 Structure ..........................7 Components ......................7 Framework and Dimension ..................7 Device Installation ......................... 9 Installation Steps ...................... 9 Restore Factory Default Setup Introduction ............11 Quick Configuration Tool .................... -
Page 6: General Introduction
1 General Introduction 1.1 Overview This series network camera integrates the traditional camera and network video technology. It adopts video data collection, transmission together. It can connect to the network directly without any auxiliary device. This series network camera uses standard H.264 video compression technology, which maximally guarantees the video quality. -
Page 7: Specifications
1.3 Specifications Please refer to the following sheet for network camera performance specification. Model IPC-HDW2100 IPC-HDW3100S Parameter TI Davinci high performance DSP Main Processor Embedded LINUX Support real-time network, local record, and remote operation at the System same time. Resources Remote operation interface such as WEB, DSS, PSS User Interface Bit stream statistics, log, and software version. - Page 8 1-ch 10/100 M Ethernet , RJ45 port Wire Network HTTP, TCP/IP, ARP, RTSP, RTP,UDP, RTCP, SMTP, FTP, DHCP, Network Protocol DNS, DDNS, PPPOE, IPv4/6, SNMP, UPNP, NTP Monitor, system setup, file download, log information, maintenance , Remote upgrade and etc Operation Restore Default Built-in Reset button...
- Page 9 H.264: 56Kbps-6144Kbps MJPEG: adjustable and bit rate is adjustable. Video Bit Rate Support customized setup. Support mirror. Video Flip Support flip function. Max 1f/s snapshot. File extension name is JPEG. Snapshot Supports max 4 privacy mask zones Privacy Mask Support parameter setup such as bright, contrast. Video Setup Video Channel title, time title, motion detect, camera masking.
- Page 10 1/3-inch CMOS 1/2.8-inch CMOS 1/3-inch CMOS Image Sensor 1280(H)*960(V) 1920(H)*1080(V) 2048(H)*1536(V) Pixel Support day/night mode switch Day/night Fixed/Auto Gain Control Manual/Auto White Balance On/Off Manual/Low noise/Low motion blur/Auto Exposure Mode It ranges from 1/3 to 1/10000 Video H.264/H.264H/MJPEG Compression Note: Some versions do not support H.264H. Standard PAL: Main stream...
- Page 11 upgrade and etc Operation Restore Default Built-in Reset button Setup IR light 10~ 20M. IR light DC12V power and PoE. Power Warning！ Do not connect these two power supplying sources to the device at the same time; it may result in device damage! DC 12V DC 12V Power...
-
Page 12: Structure
2 Structure 2.1 Components You can refer to the following figure for multiple-function combination cable information. See Figure Figure 2-1 Multiple-function combination cable Please refer to the following sheet for detailed information. Component Component Name Component 1 Device lens Component 2 Dome body Component 3 Dome enclosure... - Page 13 Please refer to the following two figures for dimension information. The unit is mm. See Figure 2-2 and Figure 2-3. Figure 2-2 Dimension illustration 1 Figure 2-3 Dimension illustration 2...
-
Page 14: Device Installation
3 Device Installation 3.1 Installation Steps Important Before the installation, please make sure the installation environments can at least support 3x weight of the camera. Please follow the steps listed below to install the device. Please refer to Figure 3-1 for reference. Step 1 Turn clockwise to remove the decoration ring from the snap joints. - Page 15 Figure 3-2 Device installation illustration 2 Note This series product supports two cable exits. One is from the bottom and the other is from the side. Please refer to the following figure for cable exit from the side information. Figure 3-3 Device installation illustration 3 Please earth the GND port of the device to enhance the device reliability.
-
Page 16: Restore Factory Default Setup Introduction
Figure 3-4 Device installation illustration 4 3.2 Restore Factory Default Setup Introduction Important Please use RESET button when device is running. Step1 Please refer to step1 and step2 in chapter 3.1to loose the dome body. Push a little bit; you can take the dome body from the gland cover. -
Page 17: Quick Configuration Tool
4 Quick Configuration Tool 4.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 4.2 Operation Double click the “ConfigTools.exe”... - Page 18 In the configuration tool search interface (Figure 4-1), please select a device IP address and then double click it to open the login interface. Or you can select an IP address and then click the Login button to go to the login interface. See Figure 4-3. In Figure 4-3, you can view device IP address, user name, password and port.
-
Page 19: Web Operation
5 Web Operation This series network camera products support the Web access and management via PC. Web includes several modules: Monitor channel preview, system configuration, alarm and etc. 5.1 Network Connection Please follow the steps listed below for network connection. Make sure the network camera has connected to the network properly. - Page 20 Figure 5- 2 Web login After you successfully logged in, please install WEB plug-in unit. Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction. See Figure 5- 3. Figure 5- 3 Web monitoring window...
-
Page 21: Faq
6 FAQ I can not boot up Please click RESET button for at least five seconds to restore the device or factory default setup. operate properly. The water leakage The unauthorized front or rear cap remove many result in water occurred. -
Page 22: Appendix Toxic Or Hazardous Materials Or Elements
If there is any uncertainty or controversy, please refer to the final explanation of us. Please visit our website for more information. Dahua Technology Co.,Ltd Address：No.1187 Bin’an Road, Binjiang District, Hangzhou, PRC. Postcode: 310053 Tel: +86-571-87688883 Fax: +86-571-87688815 Email:overseas@dahuatech.com...