Printer Parts Type B and Single two color color Type A Type D Type D DIP Switch Tables Serial Parallel Function Function Data reception Ignored Prints “?” Auto line feed Enabled Disabled error Receive buffer 40 bytes ANK Model: Receive buffer 40 bytes ANK Model: capacity...
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to...
Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire. Immediately unplug the equipment and contact your dealer or a SEIKO EPSON service center for advice. Never attempt to repair this product yourself. Improper repair work can be dangerous.
English Caution Labels WARNING: Do not connect a telephone line to the drawer kick-out connector; otherwise, the printer and the telephone line may be damaged. CAUTION: The print head is hot. Features of Printer Types Type A Type B Type D Two color printing Single color or two color...
English Unpacking The following items may be included with the printer, depending on the specifications of your model. If any item is damaged, contact your dealer. ❏ Printer ❑ Paper roll ❏ Power switch cover ❑ Ribbon cassette ❏ Journal take up spool ❑...
Note: Use the EPSON ERC-38 ribbon cassette for your printer. 1. Open the printer cover and turn the knob two or three times in the direction of the arrow as shown in illustration below.
Page 8
English 2. Turn on the printer, open the printer cover, and insert the paper roll as shown in illustration below. Note the direction the paper comes off the roll, which is shown in illustration below. 3. Open the autocutter by pulling the tab up and toward you as shown in illustration 4.
English : When using 2-ply roll paper, insert the end of the Type A only paper into the paper take-up spool as shown below. Be sure that length of dimension A is between 40 and 60 mm (1.58 and 2.36 inches) and the left side of the paper is aligned with the spool’s flange, which is indicated by the arrow in illustration below.
Page 10
English 2. Cut the receipt paper (and journal paper if you have a Type A printer and are using two-ply paper) at the locations indicated by the arrows in illustration 3. Remove the paper roll from the printer and open the autocutter by pulling the tab up and toward you.
Page 11
English Note: Do not remove the screw from the print head cover. 8. Lift up the print head cover as shown in illustration on the previous page. 9. Remove all the jammed paper. Note: Do not pull the jammed paper in the opposite direction of paper feeding.
Page 12
English Specifications: TM-U210 Models A, B, D Printing method Serial impact dot-matrix Printing direction Bidirectional logic seeking Printing width 63.34 mm, 400 dot positions 7 × 9 Font: 40, 9 × 9 Font: 33, 16 × 16 Kanji: 25, Characters per line 7 ×...