Attaching The Supplied Accessories; Attaching The Supplied Accessories To The Handheld Microphone (Ztx-M02Rc); Attaching The Supplied Accessories To The Half-Rack Receiver (Zrx-Hr70); Attaching The Supplied Accessories To The Body-Pack Transmitter (Ztx-B02Rc) - Sony DWZ-M70 Operating Instructions Manual
Digital wireless package
Hide thumbs
Also See for DWZ-M70:
- Quick start manual (2 pages) ,
- Operating instructions manual (29 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Attaching the Supplied
Accessories
This section describes how to attach the supplied
accessories to each unit.
Attaching the Supplied Accessories
to the Handheld Microphone (ZTX-
M02RC)
Attaching the microphone holder
Replacing the microphone unit
To remove the microphone unit
Turn the microphone unit in the direction of the arrow.
To attach the microphone unit
Turn the microphone unit in the opposite direction from
when you removed it, and make sure that the unit is
securely attached to the microphone.
10
Attaching the Supplied Accessories
Insert the bottom part of the
microphone into the holder.
Attaching the Supplied Accessories
to the Half-Rack Receiver (ZRX-
HR70)
Attaching the antenna
Insert the supplied antenna into the
ANTENNA a/b connector at the rear of
the receiver and turn it.
Removing the feet
Use a flat-bladed screwdriver or
similar tool to remove the pins that
secure the feet, and then remove the
feet from the half-rack receiver.
Attaching the Supplied Accessories
to the Body-Pack Transmitter (ZTX-
B02RC)
Attaching the belt clip
Align the mounting hole at the rear of the transmitter with the
hole in the middle of the supplied belt clip, and secure the belt
clip using the supplied belt clip screw.
You can also rotate the belt clip 180 degrees or 90 degrees to
the left or right before securing it.
Advertisement
Table of Contents
