3-4. Verification Items
(1) Service test print
<EEPROM information contents>
On the service test print (sample below), confirm the EEPROM information as shown below. (The information is
given in the upper portion of the printout.)
iP6220D US
iP6220D: Model name
US: Destination
V.xxx : ROM version
USB(xxxxxx): USB serial number
Dd=xxx.x: Main waste ink amount (%)
<Print check items>
On the service test print (sample below), confirm the following items:
- Check 1, nozzle check pattern: Ink shall be ejected from all nozzles
- Check 2, top of form accuracy: The line shall not extend off the paper.
- Check 3, vertical straight lines: The line shall not be broken.
<Service test print sample>
(2) EEPROM information print
<How to read the EEPROM information print>
Print sample:
1: iP6220D US 2: V1.03 3: IF(USB2=1) 4: D=004.5 Ds=0.002 5: ST=2005/07/27-18:30
6: ER(ER0=1000 ER1=0000) 7: LPT=2005/08/13-09:09
8: PC(M=002 R=000 T=001 D=009 C=009)
9: CLT(2005/08/10-18:30)
V.xxx
USB(xxxxxx) Dd=xxx.x
1-23