Table of Contents
Advertisement
Product Information MAGIC.SENS -- Product range
6. Detector base
6.1. Detector base MS 400
The MAGIC SENS detector module is placed in the MS 400 detector base, which is
used for both concealed and surface cable insertion.
The detector base is made of white ABS plastic (Novodur, color similar to RAL 9010)
and it has a matte surface. The base has 7 screw terminals for the connection of the
detector and its accessories to the fire panel.
Contacts connected with the terminals guarantee a secure electric connection
when installing the MAGIC SENS detector module.
6.1.1. Installation instructions for the MS 400 detector base
The detector base is screwed to the even, dry subsurface with 2 screws at a
distance of approximately 55 mm.
For cable insertion for surface mounting (aP), break out the prepared entry points (X)
on the external detector alarm display housing.
For concealed cable insertion (uP), feed the cable through the opening in the middle
of the base.
The long holes marked in the sketch with "Y" are intended for base installation on a
concealed box and should only be used for this.
120
X
100
Y
Page 21 of 42
Y
PI -- 34.65d
BDL- -4998121218
A23.en /09.02.2007
ST- -FIR/ PRM1 / deh
Hide quick links:
Advertisement
Table of Contents
